|
I had sh before and I just used regular tockico illuminas. I later put a non-sh engine shock's worked just as fine. Suspension wise 97- preludes are very similar almost the same except that sh has beefier 'bar' that connect control arm to a crossmember and a couple of other little things. Any shocks struts that can be used for non sh will bolt on just fine to an sh. The only thing I would recommend is to set your shocks to be a little stiffer on the front since sh is 80+ or so pounds heavier than base model.
Serge.
|
07-31-2004, 12:26 PM
