door panel

[stange567]

ok i just bought some speakers.. for my doors and i can get this damn door panel off.. i feel like a moron.. hahaha anyways.. i took 2 screws out behind the int. light, and the 2 screws out by the plastic molding..

[stange567]

nvm everyone.. i already got the speakers in.. it was a breeze.. 15 minutes each door and they sound awesome!

[randman1]

What year Bonneville?

92-99 there are three big screws, you already found the two behind the light. The third is behind the plastic cover where the power mirror switch is or would be. Go around the perimeter of the door releasing the plastic fasteners by carefully pulling the door panel or using a specific panel tool, there's probably 8 or so. Once all of the screws are removed, the plastic fasteners are released and all of the wiring is disconnected then pull upward on the whole panel. The top of the panel locks into a channel at the top of the door. Sometimes this can be a little tricky as the channel holds the top of the panel rather well.

[randman1]

Either you are pretty quick or I can't type for crap. You figured it out before I could click Reply.

Good job.