got boost?

[bigbob]

so here is the current plan... 04 mustang... procharger supercharger and intercooler. how much boost can i run untill i need new injectors/ fuel pump/ etc. and after a fuel pump injectors and maybee a new chip how manym ore lbs of boost could i run. stock everything else. any thouhgts on how many pnies or what th ET will be. sorry the question is pretty nonspecific and i no their are a lot of variables but just give me ur guesses. oh and how big of injectors should be out in. i was thinkin a 90lph fuel pump should be big enough.

[stang_racer20]

The kit should come w/ new injectors, fuel pump, etc. If not, you could probably run maybe 5 lbs of boost on your stock injectors/pump. Going higher than that and your gonna risk a possability of being way too lean. Whenever you add a power adder there are certain things at the least, that you should upgrade as well. IMO - Injectors, Fuel Pump/Filter, MAF at the least. I'd recommend 30# Injectors, at least a 190lph pump and a 75+mm MAF. Again this is my opinion, any others here?

[bigbob]

i ment 190lph not 90 lol sry typo thanks for the sugestions

[eillob]

Originally Posted by stang_racer20

The kit should come w/ new injectors, fuel pump, etc. If not, you could probably run maybe 5 lbs of boost on your stock injectors/pump. Going higher than that and your gonna risk a possability of being way too lean. Whenever you add a power adder there are certain things at the least, that you should upgrade as well. IMO - Injectors, Fuel Pump/Filter, MAF at the least. I'd recommend 30# Injectors, at least a 190lph pump and a 75+mm MAF. Again this is my opinion, any others here?

I totally agree with you. The only thing I would be concerned with is adding a chip. Most chips are going to advance your timming which is bad when your talking about boost so stay away from off the shelf chips. If after your mods you feel you still need a chip have a custom one burned for your specific application.