|
|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
#1
|
|||
|
|||
|
brakes conversions
hi i have a 92 honda accord ex coupe with a h22a and im wondering if the 92-96 prelude front brakes system including the lower and upper arm would bolt on to my accord and what axel should i use for this swap any sugesstion would be appreciated
thanks |
|
#2
|
||||
|
||||
|
I'm not all too sure about the compatibility of the control arms (I believe they're different though due to the different dimensions of the chassis), but why are you planning to swap a prelude front end setup onto your accord? If you only want the larger diameter rotors, you don't need to swap the arms. If you want better suspension, it would probably make more sense to take the aftermarket route.
__________________
ECNATSISER AL AVIV
|
|
#3
|
|||
|
|||
|
Re: brakes conversions
my passengenger lower arm is bent so im looking for a swap on the whole system i been going to the junk yard this whole week looking for a accord wagon or accord v6 i know those fit but i couldnt find any so im asking if the prelude will fit
|
|
#4
|
|||
|
|||
|
Re: brakes conversions
does anyone in here had tried doing a conversion to the front brake and suspention system?
|
|
![]() |
POST REPLY TO THIS THREAD |
![]() |
|
|