need major help with my MSD ignition install

[H234thgenPrelude]

Hi I just purchased a MSD blaster SS external coil and a MSD SCI 6300 ignition control box. I attempted to instal the system today and failed b/c the instructions i got from MSD werent Prelude specific. they were generally talking about Honda/Acura and thats it. Can anyone who did this before tell me where i hook up my wires. I know i do have to disconnect the plug going into the coil since i will be using a external one right? but do i splic into those wire or do i splice into 2 of the 4 one;s that are under the distributor cap. i really want to just install it nd get it over it with. any help, pictures even or anything would be apprecitive. thanks.

[hondaprelude88]

This is for a 3rd gen Hope it helps
http://dustin_palmer.tripod.com/Prelude/msd.html

[Prelude_goes]

i have msd on my 4th gen h23a and when i hooked it up it was pretty simple. here is how i did it... the red and white wire that come out of the ignition box goes to the old plugin. the red wire you have splice so it has two ends them two ends go the the yellow and black and yellow wire. the whit one goes to the blue wire. now for the blaster coil. the orange and blak wire connect to that i had orange on the left side and black on the right. then you just hook you coil wire to the distrubutor and put the positive and nevitive wires onto the battery and then your good to go. hope this helps