 |
 |
 |
|
|
 |
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Dog Food | IgorSushko.com | Corporate |
 | | ||
| |
|
| Latest | 0 Rplys |
|
|||||||
| Off-Topic Talk about anything other than cars. |
 |
 Show Printable Version |  Email this Page | 
Subscribe to this Thread
|
|
|
Thread Tools |
03-06-2004, 08:41 PM
|
#1 | |
|
AF Newbie
Join Date: Mar 2004
Location: Reedsburg, Wisconsin
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
|
How do you remove Tension Pulley
How does one remove the TENSION PULLEY. This is the small pulley that sits between the power steering pump and AC compressor? This is on a 98 Eclipse 2.0 DOHC.
Last edited by twost; 03-07-2004 at 12:17 AM. |
|
|
|
|
03-06-2004, 10:46 PM
|
#2 | |
|
AF Newbie
Join Date: Feb 2004
Location: Muldrow, Oklahoma
Posts: 20
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: Remove Tension Pulley
Why are u removing it? There is a bolt on it and u unscrew it and pull it off but u need it to keep the belt tight
|
|
|
|
|
|
03-07-2004, 12:14 AM
|
#3 | |
|
AF Newbie
Thread starter
Join Date: Mar 2004
Location: Reedsburg, Wisconsin
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
|
Am removing pulley because the bearing is shot. Easy enough to get the hex nut off the pulley bolt. Problem is that there is not enough room between the pulley and the sheet metal of the fenderwell to withdraw the bolt and remove it.
|
|
|
|
|
|
|
POST REPLY TO THIS THREAD |
 |
|
|
