|
|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
| Forced Induction Discuss topics relating to turbochargers, superchargers, and nitrous oxide systems. |
![]() |
Show Printable Version |
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
|
|||
|
|||
|
One more question about the BoV
Thanx for helping me earlier guys, but where is the hookup in a 1997 honda civic dx for the pipe off the top of the bov,, u said the throttle body but i was looking around and i dont see a clear place to put it.
|
|
#2
|
||||
|
||||
|
Re: One more question about the BoV
Any vacuum fitting after the throttle body. there should be one somewhere, you will probably have to use a T fitting to split another existing hose...
|
|
#3
|
|||
|
|||
|
if you are referring to the vaccum line from the bov the best place to connect it is at the stock fuel pressure regulator. Just get a "T" fitting from an auto parts store and put it in line between the manifold and the fuel pressure regualtor and off of the other fitting on the "T" run a vaccum line to the bov. Dont use the line on the back of the intake becuause it is not always under vaccum and dont use any on the throttle body because you want it to see vaccum when you shut the throttle
|
|
#4
|
|||
|
|||
|
What kind of turbo are you running and have you dynoed it yet?
__________________
93 accord - jdm h22a 2003 srt-4 - daily driver |
|
![]() |
POST REPLY TO THIS THREAD |
![]() |
|
|