How Do I Program Keyless Entry

[RACECHICK]

Help, I Need To Know How To Program The Keyless Entry Remote To My 97 Rs Camaro.

[89IROC&RS]

get in the car, hold down the unlock botton, and cycle the ignition key three times. the locks should cycle once *chick-chunk* then press and hold the lock and unlock buttons on your key fob, should take 10-15 seconds, when the locks cycle again, the fob is programed. do both fobs one after the other, without redoing the key cycling steps. when the locks cycle from the programming of the first fob, set it down, pick up the other fob, and press and hold both buttons till the locks cycle again. then turn on the ignition, then off again, and test to see if it worked. you can also try re-sinking them, stand outside the car, about 4 feet away, and press and hold the lock and unlock buttons, 10-15seconds later, the locks should cycle and the fob has been resinked.