|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
| Latest | 0 Rplys |
|
|||||||
| Off-Topic Talk about anything other than cars. |
![]() |
Show Printable Version | Email this Page |
Subscribe to this Thread
|
|
|
Thread Tools |
|
|
#1 | |
|
AF Newbie
Join Date: Jan 2004
Location: Tucson, Arizona
Posts: 32
Thanks: 0
Thanked 0 Times in 0 Posts
|
I have a 95 eclipse rs and i just got these reverse indiglow gauges but have no idea how to install them. I know that the needles can get out of calibration if I mess with them, but I want to try it myself and save myself the expenses.
If it isnt too difficult, can someone post me some installation directions or tell me a rough estimate of how much it would cost to get them installed professionally. Any help is greatly appreciated. Thanks a lot!!!!!!!! |
|
|
|
|
|
|
#2 | |
|
AF Enthusiast
Join Date: Jan 2004
Location: Bloomsburg, Pennsylvania
Posts: 671
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: indiglow guages
The hardest part of it will be pulling off the dash and other stuff. Everything after that should be plug and play. The only trick is finding all the screws and taking them out. To have it installed shouldn't cost you more than 50 or 60 bucks, maybe less. Good luck and enjoy the guages!
__________________
V8's are like tampons, every pussy needs one! |
|
|
|
|
|
|
#3 | |
|
AF Fanatic
![]() |
check out ebay... i got mine there and they cost me around 30 with shipping. These gauges slip over the needles so the cant mess up, and if you are worried take a picture before you start so you know where the needles are and then you have that just incase
__________________
For Sale 98 Eclipse GS, 5 spd |
|
|
|
|
|
|
#4 | |
|
AF Enthusiast
![]() |
Re: indiglow guages
There is already a post on this, just look back through the threads about a month. Boostedspyder wrote up installation on these and posted pics in his website.
|
|
|
|
|
|
|
#5 | |
|
AF Enthusiast
|
Re: indiglow guages
this is the thread http://www.automotiveforums.com/vbul...ghlight=gauges i did a couple weeks ago, check page 2 in the link in my sig for a pic of the wire to splice. removing the dash isn't that hard, there are 2 bolts in the upper bezel, and 4 around the cluster. it took me 1.5 hours cuz i was a lagger and i had absolutly no instructions... hope that helps
|
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||
![]() |
POST REPLY TO THIS THREAD |
![]() |
|
|