|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
| '88 - '91 Civic | CRX | Wagon | Shuttlee Partnership with: LadyNRedSi.com |
 |
 Show Printable Version | 
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
11-27-2003, 10:49 PM
|
||||
|
||||
5G distributor??
I have heard people talk about wiring up a 5G diz to a 4G civic, but keeping OBDzero. Has anyone done this? Is it really possible? Does anyone have pinouts on this? PLS let me know asap!!
__________________
Remember: You can't spell Crap without APC! Classic SE-R GTi-R turbo setup 3" DP U12 modified ECU Hyperco GenII suspension Progress sway SAFC etc. etc. 
|
|
#2
11-27-2003, 11:47 PM
|
||||
|
||||
|
Re: 5G distributor??
Where did you hear about this?
|
|
#3
11-28-2003, 12:06 AM
|
||||
|
||||
|
Re: 5G distributor??
i've never heard of this. as far as i know you need to use the correct dizzy depending on what ecu your using.
such as 88-91 si dizzy for a pm6 or a 92-95 dizzy for a p28. im almost positive you need to stay in the certain OBD's
__________________
 AF Bay Area Crew RIP Melt 2008 Mitsubishi Lancer Evolution GSR 2007 Toyota Prius   I <3 and miss my 4g 
|
|
#4
11-28-2003, 01:02 AM
|
||||
|
||||
|
Re: 5G distributor??
that's what I thought also.
|
|
#5
11-28-2003, 05:12 PM
|
||||
|
||||
|
maybe your thinking of bolting on OBD0 dizzy's to OBD1 and OBD2 motors such as the a6 dizzy needs to be modified to fit the z6 but it directly bolts on to the y8
could this be what your talking about?
__________________
2002 Acura TL Type S 1991 Honda Crx Si
|
|
#6
11-28-2003, 07:23 PM
|
||||
|
||||
|
Re: 5G distributor??
Hey Josh, after you asked me about doing that, I decided to try it out. Yes, it works fine, as long as you get the wires in the correct pins. I just wired a OBDI dizzy, with the pre OBD plugs, and it ran in the car just fine.
|
|
#7
11-28-2003, 10:02 PM
|
||||
|
||||
|
Re: 5G distributor??
Did the colors match up, or did you get a wiring diagram, or what? Do you leave any wires out? I need specifics, cuz I'm not the sharpest tool in the whole durn shed...
__________________
Remember: You can't spell Crap without APC! Classic SE-R GTi-R turbo setup 3" DP U12 modified ECU Hyperco GenII suspension Progress sway SAFC etc. etc.
|
|
#8
11-29-2003, 06:24 PM
|
||||
|
||||
|
it'll work. Just match up all of the wire colors. There are 2 white wires on the non-OBD distributor. The fat white wire gets connected to the yellow/green wire on the obd1 dizzy. The thin white wire goes to the white wire on the obd1 dizzy.
__________________
FLINT BLACK 1990 CRX SI Appearance Mods: -JDM EF8 CR-X SiR Spoiler -94/95 Integra GS-R rims Performance Mods: -JDM B18C swap -OBD1 conversion -Chipped P28 ECU -Skunk2 Intake Manifold -DC Sports 4-2-1 Header -MSD SCI-L ignition -EXEDY Racing Clutch Interior Mod -'95 Integra GS-R Gauge Cluster Former Motors - RIP: -JDM B16A #1- Blew up due to over-revving -JDM B16A #2 - Hydrolocked Former Cars  '89 CRX Si - "The Bumblebee"'94 Integra GS-R '96 Camaro
|
|
|
POST REPLY TO THIS THREAD |
 |
|
|
