|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
 |
 Show Printable Version | 
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
01-10-2002, 04:07 PM
|
|||
|
|||
|
what can i use from a lude front cut?
besides the obvious engine/gearbox/ecu, wot else can i use from the lufe front cut?? definitely not the dash... umm can i use the whole front suspension (is lude 5 lugs whereas accords are 4 lugs?)
is it even worth getting the front cut? im thinking about buying my dads 94 ex accord (4door) and swappin the motor (h22a obviously) 
|
|
#2
01-10-2002, 06:40 PM
|
||||
|
||||
|
I think some ignition components could swap over--maybe they are the same already. I'm not sure how the suspension it setup in comparison to the accord. I think you will also need a brake upgrade, im not sure if the lude came with bigger brakes than the accord. There are lots of tidbits that you need to be aware of, but i dont know them all. You might have better luck posting this in the "let's get technical" forum, where dudes like fritz, moppie, and drift could help you.
__________________
-Original PH Member- Registered in May of 2001 '98 Honda Accord Sedan 2.3L VTEC 4cyl 5-speed Generic Cold Air Intake 205/60/15 Bridgestone Potenza RE950's Save the Oompa-Loompas.....a site I helped create http://www.oompa-loompas.net
|
|
|
POST REPLY TO THIS THREAD |
 |
|
|
