cold start problem

[wikidbwoy]

when it cold out side my car has trouble starting. it stays overnigth in the garage but when i try to start for the first time it tumbles but wont start. after 2 or3 times it finnaly starts. any one have any suggestions. BTW i already put a new battery in so iknow thats not the problem.:help:

[Cyko]

I have the same problem with my max. I just bough a great battery and my car still doesnt do it's job. I got a remote starter and my engine is worm most of the time, but when I want to start my car from the house so it can worm up, it takes at least 2 try's . Anyone had this problem before ??? Any solutions ???

[wikidbwoy]

i can try and use my remote start when warm or cold and it wont work. i got tired of fukin with it and dont even use it any more:bonghitte

[scholz22]

i got a 96' max and it does the same thing, it turns over fine but takes a while to fire up. anybody know what would cause this, i have abrand new battery and alternator so that isn't it. maybe it is just the engine, cuz it is alluminum

[MegaMax]

I have the same Problem... I have done all normal stuff you can to it other than change the belts. I will hopefully have that done on my day off this Friday. I'll let you know if this takes care of it.

Things I have done are:
Oil Change
Plugs
Fuel Filter
Oil Filter
Injector Cleaners
Trans Oil
Coolant System Power Flushed
Battery relocated with GOLD connections to the Trunk

Note: All Fluids are Synthetic

Still on COLD days the first time it starts by or by remote it NEVER stays on the first try.

[Cyko]

Well, my car doesnt start at all right now. I guess it's the starter. Could anyone tell me how much $$$ this shit will cost me ?

[nubiannupe]

A decent starter shouldn't cost more than $150, I'd think. As for the starting problem, most of it may be related to the starter itself. This is just a guess on my behalf, since I went thru a similar problem, but with my last car (Nissan Sentra). Might wanna see if your starter is putting out enuff.

[MegaMax]

Not that it matters anymore I thought i'd post my Update...

I went to install the UDP and had a problem. (Couldn't get it off with out Air Tools) Anyway... I ended up having to put the Stock Belts back on and tighted everything back up and Presto!!! She starts on the FIRST try..!

Now all I need is to get to a Compressor to install the UDP..!!!

Originally posted by MegaMax
I have the same Problem... I have done all normal stuff you can to it other than change the belts. I will hopefully have that done on my day off this Friday. I'll let you know if this takes care of it.