Lamborghini Aventador LP700-4 from The Dark Knight Rises

[Iskandana]

Hi again guys,



I've been a fan of Christopher Nolan's The Dark Knight Trilogy, so this aventador is to depict Bruce Wayne's car in the last installment of the series. This is actually the second aoshima aventador that I built, I had so much fun building the first one so I decided to built another one.



The color is Mica Silver from tamiya with several layers of clearcoat also from tamiya.



Let me know what you think and thanks for looking.



Best Regards



Krishna Iskandana

Perth, Western Australia

Jakarta, Indonesia





















with the one I previously built

[generationx]

Love it, and from a great movie. Looking forward to building one of these myself.

[BVC500]

Nice job! I'm building an Aventador in the same color combo as your first. I trust you'll build the roadster coming out shortly.

[da_ashman]

Great work, they both look awesome!!! You just need a catwomen/selina kyle figure sitting in the drivers seat!

[coolnight]

Those are some pretty lambos!!!

Has the ride height been altered in these cars? I ask because these cars look nice and low (how I like 'em) and if this is how they build w/o modification then I may have to build one someday.

[Kjenjak]

I can't really remember the car from the movie, but it looks nice!
Is the metal mesh supposed to be silver, and not black?
And is it normal that the positions of the break calipers are different on both cars?

[janositamas]

Both looks great, they make a nice contrast, good job :-)

[Iskandana]

Originally Posted by BVC500

Nice job! I'm building an Aventador in the same color combo as your first. I trust you'll build the roadster coming out shortly.

Yes, I have put my pre order for the roadster as well. I haven't been able to resist to buy lamborghini kits from aoshima every time the release new products.

I just recently completed the murcielago sv, meanwhile the murcilago RSV GT it is still on its way.

[Iskandana]

Originally Posted by coolnight

Those are some pretty lambos!!!

Has the ride height been altered in these cars? I ask because these cars look nice and low (how I like 'em) and if this is how they build w/o modification then I may have to build one someday.

No mate, no modification at all to the ride heights.

Regards

[Iskandana]

Originally Posted by Kjenjak

I can't really remember the car from the movie, but it looks nice!
Is the metal mesh supposed to be silver, and not black?
And is it normal that the positions of the break calipers are different on both cars?

They were suppose to be black I guess, but I had a bad experience painting the mesh black when I did my ferrari FXX, so I didnt touch them at all.

About the calipers, I did not notice the difference until you mentioned about them, , it was a year building gap between the two and I didnt realise that I made a building mistake.

Thanks for the comments

[nugundam93]

but... but... where's bruce?

just kidding. great work!