Need info on 2016 Ford GT LeMans

[Zonic2001]

I will be building this 1/24 scale kit soon. Have searched pictures on-line and found many of the exterior but not many of the cockpit with interior wiring and electronic boxes details. I have a pic of the front dash but none from the rest of the cockpit. Nothing on the footsteps or either side of the driver. Therefore, I'm asking here to see if anyone can help. Thanks for reading my post!

[Zonic2001]

Kept looking and using different search engines and finally found what I was looking for.

[wadny]

Please share - I have the Profil 24 kit and could also use some references! Thanks.

[Jayban]

Try here

http://www.hotrod.com/articles/exclu...acing-ford-gt/

Jeremy

[vintagethunder]

Quite the piece! And there is a link at the end for 177 pics!

[Zonic2001]

Here is another link: http://www.ultimatecarpage.com/cg/62...GT-LM-GTE.html

[Zonic2001]

Originally Posted by wadny

Please share - I have the Profil 24 kit and could also use some references! Thanks.

Have you started the kit? This is my first resin kit and is going to need a lot of work to get it finished.

[Zonic2001]

Originally Posted by Jayban

Try here

http://www.hotrod.com/articles/exclu...acing-ford-gt/

Jeremy

Excellent pics specially of the cockpit. Thanks!!!!

[Jayban]

Another good source here

https://www.flickr.com/photos/fordch...iracing/albums

Lots of browsing required

Jeremy

[Zonic2001]

Originally Posted by Jayban

Another good source here

https://www.flickr.com/photos/fordch...iracing/albums

Lots of browsing required

Jeremy

Plenty of pics!!!! Haven't seen this site before... great!!!! Man... you are good!

[Jayban]

Originally Posted by Zonic2001

Plenty of pics!!!! Haven't seen this site before... great!!!! Man... you are good!

I have the Profil24 Kit as well so I had already done some research

Jeremy

[Zonic2001]

Originally Posted by Jayban

I have the Profil24 Kit as well so I had already done some research

Jeremy

Have you looked at the kit closely? I'm currently debating if I should glue the roof now before priming or after I prime and paint. If I leave it for later then, I glue the roof and I have to fill the gaps of the roof flares into the body and I think that will be tricky to do. I could mess the paint job. As well, if I glue the roof and fill the flares to the body now before priming, I think that later painting it, there will be some areas inside the air tunnel made by the roof flares and the body that I would not be able to get to it. Do you follow me? Any suggestions?

[Jayban]

Take a look at Profil24 Facebook page

It shows a stage by stage way to do it

Jeremy

[Zonic2001]

Originally Posted by Jayban

Take a look at Profil24 Facebook page

It shows a stage by stage way to do it

Jeremy

I went to the FB page and only saw about 4 pics of the way it was painted. Is that what you are referring to?

[Jayban]

Originally Posted by Zonic2001

I went to the FB page and only saw about 4 pics of the way it was painted. Is that what you are referring to?

Click on the images
It shows the blue and white painted first.
Then the roof painted and added - then the next picture shows that the roof joint has been filled and blended and more red painted over the joint.

Press the arrows on the side of the images - there are a few more images

Jeremy