|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
#1
05-26-2013, 11:07 PM
|
|||
|
|||
|
Balance Shaft Belts
Can a Honda Accord 2.2 liter engine work without balance shaft belt?
Also, at what RPMs do the vibration on the crank shaft start? UPDATE: Sorry it should have said "without" instead of "with" Last edited by newyorkcar400; 05-28-2013 at 02:41 PM. 
|
|
#2
05-27-2013, 04:34 PM
|
||||
|
||||
|
Re: Balance Shaft Belts
I cannot understand your question.
I believe that 2.2 engine does have a balance shaft belt. I once made a mistake and installed a balance shaft belt 180 degrees off. It idled fairly well but when driving, (at about 2000 rpm) the car was making a very bad sound. I hope that answers your question, Regards, Sam
__________________
Quote:
|
|
#3
09-05-2013, 01:54 PM
|
|||
|
|||
|
Re: Balance Shaft Belts
Since the balance belt also drives the oil pump, it's probably not advisable
|
|
#4
09-14-2013, 12:06 AM
|
|||
|
|||
|
Re: Balance Shaft Belts
Honda Accord 2.2. used two shaft to balance engine. If i am not wrong here, it is balance follow the princicle of the Lanchester
Method install is: shaft 1 have mark on pulley and block engine shaft 2 have not mark but we do as follows: -Remove bolt used hexagon 12 next to shaft (bolt is putted perpendicular with balance shaft) -measure distance in the hole with bock Distance about 8mm, that is ok Install balance belt It is sure to noise will out
|
|
 |
POST REPLY TO THIS THREAD |
| Tags |
| belt , shaft |
 |
|
|
