Ram radio harness help....

[TCHRISD]

I have a '98 dodge ram single cab pickup. I removed the factory basic tape player AM/FM radio and installed a new radio. Well I don't like my new radio and want to put the factory back in. Problem is I removed all the wire from the harness to connect to the harness for the new radio and I forgot which slots the wire go into on the old harness. The male ends are still on the wire so I can just snap them back into the harness.
Can anyone help me with the wiring order?

[Chris Stewart]

Here's a downloadable 2001 service manual.
The download is kinda slow but worth the wait.

http://dl.dropbox.com/u/42304/2001DodgeRam.pdf

The Audio section starts on page 424.
There's some wiring in the Wiring section.

[TCHRISD]

Originally Posted by Chris Stewart

Here's a downloadable 2001 service manual.
The download is kinda slow but worth the wait.

http://dl.dropbox.com/u/42304/2001DodgeRam.pdf

The Audio section starts on page 424.
There's some wiring in the Wiring section.

thanks but the harness on my radio is just one piece and not two harnesses like showed in the pics. I wonder if I have a different year radio in it????

[Chris Stewart]

Since the manual is '01 and your Dodge is a '98, there must be a difference.
Sometimes it hits and sometimes it misses.

[aleekat]

this may help.

http://www.installdr.com/Harnesses/DCP-Wiring.asp

[TCHRISD]

Originally Posted by aleekat

this may help.

http://www.installdr.com/Harnesses/DCP-Wiring.asp

Thanks for the try but this is showing the same 2 piece harness.
Mine is a one piece with 16 holes. Although all 16 are not used. One piece divided into two sides of 8.

[aleekat]

One piece at the bottom.