e-brake

[oldguy2]

I'm changing my rear air bag system to springs and replacing the r. shocks.
When we raised the car to do the work,I noticed the e-brake cable hanging loose.I looked for a clip or some kind of connector where it might attach but didn't see anything.
Does anyone have any ideas or pics of the system,my repair manual has nothing that helps me...

[Towncar]

Originally Posted by oldguy2

.... Does anyone have any ideas or pics of the system,my repair manual has nothing that helps me...

Is this for your 1992? Do you have the FSM or another manual? I believe I have your FSM here somewhere, it's yours if you need a copy.

Here's a sample of the FSM data:

[oldguy2]

I have a chilton,the soft cover one...What is a FSM...
the pics you posted are exactly what I'm look'n for...
What do want for the FSM...

[Towncar]

Originally Posted by oldguy2

I have a chilton,the soft cover one...What is a FSM...
the pics you posted are exactly what I'm look'n for...
What do want for the FSM...

I'm sending you a PM with what your looking for

PS.. I'll bet either "T" or "W" (reference from above shot) rusted or corroded through and let the cable drop.

[oldguy2]

I got the file but can't open it...

[Towncar]

Originally Posted by oldguy2

I got the file but can't open it...

Sent instruction to PM.

Basically you have an ISO zipped. Extract the ISO and burn it to a disc. Then install the FSM software.

Personally I use a virtual drive and have all my ISO's on the PC.