|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Dog Food | IgorSushko.com | Corporate |
|
| Latest | 0 Rplys |
|
|||||||
| F Series Forum covers questions and discussions regarding Ford F-150, Ford F-250, Ford F-350, Ford F-450, Ford F-550, Ford F-650, and Ford F-750. |
![]() |
Show Printable Version | Email this Page |
Subscribe to this Thread
|
|
|
Thread Tools |
|
|
#1 | |
|
AF Newbie
Join Date: May 2011
Location: GY, Georgia
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
|
Ford f150 installing fuel injector
My 1990 ford f150 Was skipping I found that some squirrels had chewed my wires. I fixed the wires. Still skipping... Its got new spark plugs and cables. I think it might be an injector. How do you remove one and put a new one in?
Last edited by Ccoleman912; 05-01-2011 at 06:29 PM. Reason: Messed up words |
|
|
|
|
|
|
#2 | |
|
AF Enthusiast
Join Date: Mar 2004
Location: lindsay, Oklahoma
Posts: 794
Thanks: 1
Thanked 40 Times in 39 Posts
|
Re: Ford f150 installing fuel injector
You might try a cylinder balance test? Engine idling, Kill the cylinders one at a time, The cylinder that you kill that has the least effect on rpms is a dead or weak cylinder. Then you check spark--fuel--compression. Any applicable trouble codes?
|
|
|
|
|
|
|
#3 | |
|
AF Newbie
Join Date: Sep 2005
Location: Rutherford, New Jersey
Posts: 84
Thanks: 0
Thanked 3 Times in 3 Posts
|
Re: Ford f150 installing fuel injector
Most fuel injectors have a tiny micro basket filter installed in the top of the injector. I've seen these get clogged with crud and because they are so small it does not take must to completely or partially clog them. You can see these filters here: http://www.ecrater.com/p/10991905/bo...keywords=bosch type. I like to replace these filters. They are pressed in but it is easy to get them out and install new ones. Also, you should replace the injector orings whenever you remove and install injectors.
|
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||
![]() |
POST REPLY TO THIS THREAD |
![]() |
|
|