94 s-10 blazer 4x4 transmission shifting problems

[robert3571]

I have a 94 s-10 blazer 4x4 and it will not shift past 2nd gear.Reverse is strong and 1st and 2nd are good but when it tries to shift to 3 just slips and revs the engine.There are no codes and I just changed out the trans fluid and filter,fluid looked good and nothing in pan or filter.Any ideas what to try next that i might be able to do myself.Thank-you for your assistance.

[MT-2500]

Have you checked for codes with a transmission capable scanner?
Any check engine lights?
Fluid level hot in park with engine running?

[avare]

Originally Posted by robert3571

I have a 94 s-10 blazer 4x4 and it will not shift past 2nd gear.Reverse is strong and 1st and 2nd are good but when it tries to shift to 3 just slips and revs the engine.There are no codes and I just changed out the trans fluid and filter,fluid looked good and nothing in pan or filter.Any ideas what to try next that i might be able to do myself.Thank-you for your assistance.

Hi, i have exactly the same problem in my 97 Jimmy. Have you got some resolution to this problem. All new parts in gearbox.Thanks in advance.

[MT-2500]

Originally Posted by avare

Hi, i have exactly the same problem in my 97 Jimmy. Have you got some resolution to this problem. All new parts in gearbox.Thanks in advance.

On yours if you need help start a NewThread/post and someone will help.
Also all info and what all was done gear box to and what gear box any why.

[rprough]

Possible it might be one of the servos in the tranny. Easy to get to after pulling off the pan. Im not a tranny gut by no means though.