|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
#1
02-18-2011, 02:29 PM
|
|||
|
|||
|
Transmission problems
My son's 4runner blew a head gasket. I pulled the entire engine out and rebuilt it. I fingured that since I was in it, I minus well do everything. Now that the engine is back in and running, I went to put the truck in gear and nothing happens. I can put it in any gear, reverse, forward, etc. and it will not move. It is like it is in Neutral. I can roll the car but that is it. I'm wondering if I did something to the transmission when I put the engine in.
Thanks for you help. 
|
|
#2
02-19-2011, 04:45 PM
|
||||
|
||||
|
Re: Transmission problems
Is the stick shift connected to the transmission and is there a chance the gear selector linkage on the tranny got moved while working on the engine ?
Just a suggestion..... 
__________________
OzzyO
|
|
#3
02-19-2011, 11:06 PM
|
||||
|
||||
|
Re: Transmission problems
Auto or manual trans?
__________________
84 4Runner - ARBed 5.29s F&R, 4.7 & 2.28 t-cases, Chevys, AP x-over, BudBuilt x-member, 2" drv trn lift, 36" TSLs, 30 spline Longs 80 something p/u - Buick 231 V6/TH-350 trans, Holley 4 bbl, Weiand intake, dual batts, dual tanks ... 89 4Runner - stock 2000 Isuzu Trooper + 2010 Sonata
|
|
#4
02-28-2011, 06:51 AM
|
||||
|
||||
|
Re: Transmission problems
My 95 V6 3.0 automatic trans is slipping also, but not as bad as you describe. The guy I bought it from had to replace a head gasket from an overheating issue that was happening for awhile. I replaced the radiator & thermostat...thats all it was. Runs cool now but tranny slippimg. My fluid is burnned so I am going to replace oil & filter to see if that helps. Tranny fluid is bad from clogged radiator.
|
| ||||||||||||||||||||||||||||||||||||||
 |
POST REPLY TO THIS THREAD |
 |
|
|
