sorry but your going to have to read it all to understand.
i have a 1991 gmc 1500 4X4, and the cab was rotten, i got a 92 chevy 1500 2X4 with a great cab. this is were i went wrong, i cut all the wires coming from the cab of the 4X4, and i cut them up close so i could just pull off the cab, my intention was to use the wiring from the 2X4 so i took all the wiring off that truck with care not to destroy the wiring, so i put the cab in my 4X4, went to hook up all the wires, but, i'm missing some wires.
- transfer case = 2 wires with 1 plug
- front diff = 2 wires with 1 plug
- front diff = 3 wires with 1 plug
now i still have the wiring from the 4X4 cab and the computer but that is it, i took the cab to the scrap yard and i never took the fuse panel or the rest of the stuff out of it, and yes i went back to the scrap yard but it has been flattened already, so now what do i do.
damn did i ever screw up this time.
do i need these plugs hooked up?
is there some way to hard wire them?
PLEASE HELP. i cant let my wife know this is going to cost me more money, she will never let me forget that i actually made a mistake, cause men dont do that.
09-13-2010, 10:27 AM
