Hitch Install Help

[unboundmind]

i need to install a class 2 hitch. i can see where the holes are in the frame. what i can't figure out is how i'm going to get the nuts for the bolts into the frame when there is no hole in the frame i can see to put my hand thru to put the nut and tightening tool into. any help there?? thanks1

[Mike Gerber]

I believe those holes are already threaded. Check that first.

Mike

[unboundmind]

Originally Posted by Mike Gerber

I believe those holes are already threaded. Check that first.

Mike

Thanks Mike. Yes 2 holes on each side are threaded. Depending on the hitch there are 2 additional holes to drill on driver side to put u shaped holder in. if the threads are all you need then that is a piece of cake. probably that stuff that seals the threads semi permanently so they don't vibrate out would be good, yes? i figured you needed the nuts to hold it.