Import Nights TV - INTV

4G4D Store · 02-28-2009, 03:02 PM

I have finally got my TV Show started. Import Nights TV is your source for Sport Compact How-to's and Reviews. Check out the first episode at http://importnightstv.com . Our goal is to show you in our how-to's exactly how to do things on your car bolt by bolt. None of this explaining and telling you to take parts off. We actually show you how to do it. Check it out and let us know what you think. If you have any suggestions, comments or questions you can email us at [email protected]

KoDKingVegeta · 03-01-2009, 03:27 PM

Why did you guys pull the motor to do a head gasket? You can change the gasket with the motor in the car.

4G4D Store · 03-02-2009, 04:13 AM

We did that originally, and had the head machined, but the headgasket blew within 2 minutes of firing up the motor. Come to find out the water pump fins were spinning freely on the shaft so no coolant flow and the block was warped (double wammy). The person that owned it ran the motor with a blown headgasket for a few months supposedly. Block was toast. We pulled the motor and replaced it with another d15. We also pulled the whole thing cause the main input shaft bearing on the transmission was making some noise.

KoDKingVegeta · 03-02-2009, 05:05 AM

Quote:

Originally Posted by 4G4D Store

We did that originally, and had the head machined, but the headgasket blew within 2 minutes of firing up the motor. Come to find out the water pump fins were spinning freely on the shaft so no coolant flow and the block was warped (double wammy). The person that owned it ran the motor with a blown headgasket for a few months supposedly. Block was toast. We pulled the motor and replaced it with another d15. We also pulled the whole thing cause the main input shaft bearing on the transmission was making some noise.

I see, now I understand. Well good episode. Whens number 2?

4G4D Store · 03-02-2009, 10:06 AM

Number 2 should be this weekend hopefully. Gonna try to get one episode at least every 2 weeks if not every week. Episode 2 will be a b18a1 build - headgasket, timing belt, basic stuff. We have the how-to section of it recorded, just have to film the talk show parts and cut and edit.

KoDKingVegeta · 03-02-2009, 09:32 PM

Sweet, can't wait. And I'm sorry if I made it seem like, you guys didn't no you could change the head gasket with the motor in the car. LOL, thats not really how I meant to type it.

kris · 03-02-2009, 11:20 PM

Quote:

Originally Posted by 4G4D Store

Number 2 should be this weekend hopefully. Gonna try to get one episode at least every 2 weeks if not every week. Episode 2 will be a b18a1 build - headgasket, timing belt, basic stuff. We have the how-to section of it recorded, just have to film the talk show parts and cut and edit.

Check your PM's please.

4G4D Store · 03-03-2009, 12:40 AM

I checked it. Igor said I'm ok with posting my links.

kris · 03-03-2009, 08:23 PM

Quote:

Originally Posted by 4G4D Store

I checked it. Igor said I'm ok with posting my links.

Thank you.

4G4D Store · 03-28-2009, 10:16 AM

Episode 2 has be release and is watchable from our website. http://www.importnightstv.com

4G4D Store · 05-22-2009, 02:43 AM

Episode 3 has been finished and is online - B18A1 install into a 4G hatch - http://importnightstv.com

GET HEALTHY AFFORDABLE DOG FOOD

DEVELOPED BY THE AUTOMOTIVEFORUMS.COM FOUNDER & THE TOP AMERICAN BULLDOG BREEDER IN THE WORLD THROUGH DECADES OF EXPERIENCE. WE KNOW DOGS.

CONSUMED BY HUNDREDS OF GRAND FUTURE AMERICAN BULLDOGS FOR YEARS.

NOW AVAILABLE TO THE GENERAL PUBLIC FOR THE FIRST TIME

PROPER NUTRITION FOR ALL BREEDS & AGES

POST REPLY TO THIS THREAD