|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
| Register | FAQ | Social Groups |
 |
 Show Printable Version | 
Subscribe to this Thread
|
|
|
Thread Tools |
|
#2
04-08-2008, 05:37 PM
|
||||
|
||||
|
Re: Drain and fill
The final mix should be 50/50 (or whatever you need for freeze protection). If you just drained and filled, add 50/50 to it. If you flushed the block with water, add 1/2 the capacity of straight coolant, then top it off with water.
__________________
'04 Cavalier coupe M/T 2.2 Ecotec Supercharged 14 PSI boost, charge air cooler, 42# injectors Tuned with HP Tuners Poly engine/trans/control arm bushings Self built and self programmed progressive methanol injection system 
|
|
#4
04-09-2008, 06:26 PM
|
|||
|
|||
|
Re: Drain and fill
If it was entirely empty it takes about 3 gallons total. Fill it with the appropriate mix and bleed the system. The quad motors can take a while to bleed, mine used to take me about 45 minutes for the tstat to open and close several times and it will swallow a bit more coolant during the process.
__________________
Rusting out Honda Civic $900 Fart cannon muffler: $300 Assorted stickers advertising products you'll never own: $50 Having your @ss handed to you by a brick shaped suv: Priceless. Yup, I own the suv.
|
|
|
POST REPLY TO THIS THREAD |
 |
| Thread Tools | |
|
|
