|
|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
| Register | FAQ | Social Groups |
| '88 - '91 Civic | CRX | Wagon | Shuttlee Partnership with: LadyNRedSi.com |
![]() |
Show Printable Version |
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
|
|||
|
|||
|
Escort Rims on my LX! Yes!
I got the Escort rims to fit my car! The bolt pattern was fine, only problem was the centerbore. There's a little rim about 3/8 of an inch tall that sticks out of the hub. It almost fit without alteration, but not quite. That not quite meant that the wheels didn't actually butt up against the hubs, so they could move around whenever I drove.
I can't stand ANY vibration, and after having the bullshit guy at Discount Tire try to sell me some new rims, I fixed the problem. It was easy! I got two packages of these sanding wheels, kind of shaped like little drums on a bit. I got 3 of 'em in one package for $3.99 at Walmart. I bought two packages, and used four of the six bits. You get three different grains of sandpaper on these little drums. I stuck the bit in my drill, and slowly worked my way around and around the inside of the rim on the centerbore until I'd removed enough aluminum for them to fit perfectly. It took about 2 hours and made my back sore, but it was worth it to make things fit right and not have to buy other rims. Flunky PS-Here's a link to another thread with pix: http://www.automotiveforums.com/vbulletin/t100176.html Last edited by 4-Door Flunky; 04-29-2003 at 03:04 PM. |
|
#2
|
||||
|
||||
|
sweet....that is about the only Ford part I might put on my car..I think i have seen other Civics with Escort rims...but I bet they didn't get rid of that little nubby like you
- Good job!
__________________
-Shawn '91 Civic DX sedan DOHC ZC, I,H,E, urethane bushings and mount inserts, rock chipped hood, some rust, stock steelies, nice comfy Integra seats, and the A/C works! What else could you want from an 18 year old car with 241,000 miles? Working on getting the Si tranny in now
|
|
#3
|
|||
|
|||
|
Sounds cool! Can we see some pics?
|
|
#4
|
|||
|
|||
|
I've got the link for the image in the post but I don't know how to make the image show up in the post.
Help! Flunky |
|
#5
|
||||
|
||||
|
Why don't you just sell those to someone with an Escort and buy some cheap Si's or webs or anything made by Honda? They look okay on your car but IMO donuts look better.
|
|
#6
|
|||
|
|||
|
I had someone who was very interested in buying the car this weekend, so time was of the essence. Also, I didn't have any money to buy rims.
I do own a set of Si rims, off of a CRX, but I want to keep them (and the Eagle tires mounted on them) for my next project, which is an Acura Integra GS. Flunky PS-The car buyer flaked out on me, but that's ok. She didn't deserve a Honda this good. PPS-What's a 'donut'. Apart from a Krispy Kreme, that is. PPPS-I'll bet that what you refer to as a 'donut', I call "A bambi spare." |
|
#7
|
||||
|
||||
|
donut = the tiny ass spare tire
__________________
AF Bay Area Crew ![]() 97 Toyota T100 xcab 3.4l v6 5spd 2wd |
|
#8
|
||||
|
||||
|
donut=steelies=pop off the hubcaps and roll ghetto
|
|
#9
|
||||
|
||||
|
Quote:
__________________
FLINT BLACK 1990 CRX SI Appearance Mods: -JDM EF8 CR-X SiR Spoiler -94/95 Integra GS-R rims Performance Mods: -JDM B18C swap -OBD1 conversion -Chipped P28 ECU -Skunk2 Intake Manifold -DC Sports 4-2-1 Header -MSD SCI-L ignition -EXEDY Racing Clutch Interior Mod -'95 Integra GS-R Gauge Cluster Former Motors - RIP: -JDM B16A #1- Blew up due to over-revving -JDM B16A #2 - Hydrolocked Former Cars '89 CRX Si - "The Bumblebee" '94 Integra GS-R![]() '96 Camaro
|
|
#10
|
||||
|
||||
|
i call donut tires anything soft and shitty...like Dunlop SP20's or Goodyear Arriva's ,etc., or the donut spare
__________________
-Shawn '91 Civic DX sedan DOHC ZC, I,H,E, urethane bushings and mount inserts, rock chipped hood, some rust, stock steelies, nice comfy Integra seats, and the A/C works! What else could you want from an 18 year old car with 241,000 miles? Working on getting the Si tranny in now
|
|
#11
|
|||
|
|||
|
i thought about trying 5 star focus rims cause they are 16s
__________________
95 b18b new crank, eagle rods, je 10.5 : 1 pistons, 8lb flywheel, stage 3 act clutch, billet aluminium and urathane mounts, balanced rotating mass, 14.3 @ 93mph New additions, teo4h turbo, ssautochrome turbo manifold, custom piping, turboxs bov, dsm 450cc injectors, greddy e-manage fuel controller 13.07 @ 107 untuned |
|
#12
|
||||
|
||||
|
Quote:
__________________
The Civic is gone... The Camry never ran... The Chevy is here to stay... The Ultimate Honda Engine
|
|
![]() |
POST REPLY TO THIS THREAD |
![]() |
| Thread Tools | |
|
|