2.2 l S-10, Enginelight on, P1336

[Uppsala]

Has a 2.2 lit S-10 where the engine light is on and error code P1336 is stored, I've tried to erase the error code but it comes back immediately, what do you do??
Where is the crankshaft sensor or camshaft fitted?

[MT-2500]

What year?

Has anything been replaced on it?

Code 1336 on a 98 says you need to prfrom the cranhshaft positin variation relearn.
The relearn thing is built into a good engine capable scanner.

[Uppsala]

Originally Posted by MT-2500

What year?

Has anything been replaced on it?

Code 1336 on a 98 says you need to prfrom the cranhshaft positin variation relearn.
The relearn thing is built into a good engine capable scanner.

Its -98, nothing have been replaced, it was out off battery one weekend and
after that the liht is on.

[MT-2500]

Battery disconnect may have done it.
Go threw the relearn and clear codes and recheck and let us know what it does.

[Uppsala]

Originally Posted by MT-2500

Battery disconnect may have done it.
Go threw the relearn and clear codes and recheck and let us know what it does.

ok, one of my friends has one scantool reader maybe he can fix it ??

[MT-2500]

You will need a engine capable scanner.
Let us know how it goes.
Good Luck

[Uppsala]

Originally Posted by MT-2500

You will need a engine capable scanner.
Let us know how it goes.
Good Luck

releran was the medicin, took 30 seconds to do it