|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
 |
 Show Printable Version | 
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
10-14-2009, 12:51 AM
|
|||
|
|||
|
need 2 small hoses for coolant bypass to intake, any ideas
I tried to by hose by the foot but the angle on the aft or right hose is a little to tight for my taste it's on a 3.4 2005 base model impala
|
|
#2
10-14-2009, 01:58 AM
|
||||
|
||||
|
Re: need 2 small hoses for coolant bypass to intake, any ideas
Did you check with Autozone ? They show a bypass hose on their web site .
__________________
" Sometimes I grow so tired "
|
|
#3
10-14-2009, 02:22 AM
|
|||
|
|||
|
Re: need 2 small hoses for coolant bypass to intake, any ideas
the one they have is the one on the passenger side i need the two on the drivers side, but thanks
|
|
#4
10-18-2009, 11:09 PM
|
|||
|
|||
|
Re: need 2 small hoses for coolant bypass to intake, any ideas
went to napa they had a preformed hose for $9 go NAPA or look at rockauto.com
|
|
#5
10-25-2009, 11:39 PM
|
||||
|
||||
|
Re: need 2 small hoses for coolant bypass to intake, any ideas
Go to the dealer and get them, they are not that expensive...actually I have heard of people completly bypassing the throttle body... don't know if I would try that...just replaced my thermostat and I replaced both the in and out coolant hoses to the throttlebody.
|
|
|
POST REPLY TO THIS THREAD |
 |
|
|
