96 Altima clicking/rubing noise in rr

fritcr · 07-17-2009, 05:17 PM

I have had the drum off 3 times and turned once. The noise always comes back. I can't see or find anything wrong. Anyone have any ideas? Brake shoes are good no leaks anywhere and car stops fine but man it drives me nutz.
Rob

fritcr · 08-13-2009, 03:00 PM

Well I put a new drum on and now it does not click or tick but the back end shakes. I don't know if I got a bad/out of round drum or what. I picked up yet another new drum today and a set of brakes even though it does not need them.

Mrbizness1 · 08-29-2009, 05:39 PM

Quote:

Originally Posted by fritcr

Well I put a new drum on and now it does not click or tick but the back end shakes. I don't know if I got a bad/out of round drum or what. I picked up yet another new drum today and a set of brakes even though it does not need them.

Maybe the first drum was not square. It probably had a slight wobble to it and was rubbing against the backing plate. I had a new rear rotor that was out of round at the outer edge and make noise. be careful not to over tighten the lug nuts or you can bend the drum. Spin the axle with the drum off and look for axle run out.

GET HEALTHY AFFORDABLE DOG FOOD

DEVELOPED BY THE AUTOMOTIVEFORUMS.COM FOUNDER & THE TOP AMERICAN BULLDOG BREEDER IN THE WORLD THROUGH DECADES OF EXPERIENCE. WE KNOW DOGS.

CONSUMED BY HUNDREDS OF GRAND FUTURE AMERICAN BULLDOGS FOR YEARS.

NOW AVAILABLE TO THE GENERAL PUBLIC FOR THE FIRST TIME

PROPER NUTRITION FOR ALL BREEDS & AGES

POST REPLY TO THIS THREAD