|
|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#1
|
|||
|
|||
|
'90 Grand Marquis Ignition Problem
I have a 90 grand marquis and i recently moved the starter solonoid to the firewall. after doing this the car never started again. it turns over. has fuel, just no spark. if anyone can help, it would be VERY appricatied. i need an ignition diagram.
|
|
#2
|
|||
|
|||
|
Re: '90 Grand Marquis Ignition Problem
Look at the location where it was located some times some small wires are attached to the main wire on both sides of the solenoid. Did you miss one or put it on the wrong the wrong side. You can use an old one and check wire length and use a splice connection and another piece of wire. Always coat the connector with silicon on both ends.
I think you just missed a wire if it ran before you started. Check for a burned fuseable link. |
|
![]() |
POST REPLY TO THIS THREAD |
![]() |
|
|