67 Mustang „Eleanor“ Transkit by Scale Production - Kit review

[sportracer02]

I just got an issue of the transkit, which is based on the famous Mustang in the film „Gone in 60 seconds“.

As there are alredy some comments about the transkit - http://www.automotiveforums.com/vbul...d.php?t=904285 - I thought a kit review might be interesting


Here are the parts coming in the transkit, which is based on a AMT 67 Shelby Mustang Fastback-kit.





The body:

One more time Scaleproduction shows, that it is possible, to produce resin parts in a very clean way ( the resin parts you see come directly out of the box, I did no cleaning !!)
The body is crisp, no bubbles or holes, not even on the underside. All panel lines are engraved, wheelwells, side skirts with opening for the exhaust, air intakes behind the doors, rear wing and front fender are modified to look like the 1:1 car. Hood looks great with ist powerdome.

Just on the AMT kit the wipers come with the body, I will think of sanding them away and replace them with separate parts.

















The wheels

Each wheel comes in three parts:
- the vinyl tire in a convincing tread
- the inner resin part with superb engraved five „V-spokes“
- an engraved alu-ring for the front of the wheel










White metal parts

To provide the engine of the model with (optical) power, there is an air filter and the cylinder heads in Cobra-design in the transkit, very fine casting, you can read „Cobra“ on the parts. I am thinking of just polishing them out.

Gas filler cap is a little piece of art. It is surrounded by 8 screws !!

The mirrors come as metal parts, too











Etched parts

These are very fine and crisp.
They provide the model with two grills for the font, brakes, knock-offs for the wheels, emblems (on which you glue the GT 500 and shelby-snake decals), hood fasteners, very fine surrounding for the exhaust in the side skirt, licence plate and seat belt fastener








Futher you find decals for the emblems, the side stripes, the RPM-Meter, licenceplate, the lights, an some fabric for the seat belts in the box.










To me, the transkit is great. For 69 Euro I get f.e. a body, I can use without lots of cleaning (I just remember a WRC transkit body with resin rods at the windows –looking like jail- that must be removed)

For those, who like film cars: look on http://www.scaleproduction.de/imagesresin/Transkit.jpg , there is a transkit for the GMC truck of the „Fall Guy“ on its way !!!

[blubaja]

Thank you for the review!!! That kit does indeed look terrific!!! The brakes look like something revell ag would concoct, but I guess it works out with those wheels, and being able to have the car sit lower without really modding the suspension. Odd how they cast the doorhandles in resin, and not chromed, or just made them in the same metal as the other beautiful parts.

[dmacb]

Very well done

[tonioseven]

I might have to check further into that one.

[MidMazar]

Sweet thanks for sharing, how come you always get their new kits? Could i join that list?

I gotta say that Scale production produces the cleanest resin. My VW golf rally transkit looks flawless with no air bubbles, hardly do i get to say that. With what resin kits cost, they should all be this quality. Enough reviews, get this beast built. Progress Please!!!

Thanks again for sharing, don't stop showing us reviews of scale production stuff.

[rockinanko]

yes i have to agree, the resin body is really 'clean' & crisp. i wonder how's the thickness overall, just in case you wanna open up the inlets etc...?

i believe this is pressured cast...so smooth that i can only find resin parts belonging to those 1/48 aircraft!

while i'm a 100% avid 1/24 ferrari fan, i sort of lean slightly to this kit now...after seeing the review here! hehe...one last thing, what scale is this!?

cheers!

marc
SGP

[jano11]

It's a 1/25 scale!
I'm thinking about getting one too!

[sportracer02]

Hi,

thanks for the comments.

Here are 2 photos of the painted body of the German modeler mate, who did the master for the body:






... and this is the base kit you need : http://www.ltproshop.com/Picture%20471.jpg

[sam01contact]

Great! What about the color? Any ideas?

[sportscars24]

@sam01contact

Great! What about the color? Any ideas?

No Problem

I have the original codes.

The color on the painted body was ordered by me.

The Colors are:

Main: Du Pont Fleet Pepper Gray Metallic 44490

Stripes: Du Pont Fleet Black Metallic 44435

So now if someone need this color,so you can contact me at [email protected]

The Color is on stock and it comes basic ready to brush.

Regards Roger

[sportracer02]

Oh guys,

before I forget:

Randall "Memphis" Raines (aka as Nicolas Cage in real life), the main character in "Gone in 60 Seconds", is also waiting, that the model is finished ;-)








(The figure will be available soon here: http://www.automobilminiaturen.de/in...2_Figuren.html )

[brady_381need72c10]

great!
but could you use the 67 gt kit as well?
and can somebody tell me the cost of this kit in usa terms$$$

[sportracer02]

Originally Posted by brady_381need72c10

great!
but could you use the 67 gt kit as well?
and can somebody tell me the cost of this kit in usa terms$$$

Try this www.x-rates.com

[klutz_100]

Great review Micha and VERY tempting!

I'd also like to ask if the AMT version is the ONLY base kit that will fit the T/k?

[sportracer02]

Originally Posted by klutz_100

I'd also like to ask if the AMT version is the ONLY base kit that will fit the T/k?

Thanks, Steve.

As the transkit is built up on the kit I posted (which is a reissue), it fits best here.