 |
 |
 |
|
|
 |
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Dog Food | IgorSushko.com | Corporate |
 | | ||
| |
|
| Latest | 0 Rplys |
|
|||||||
 |
 Show Printable Version |  Email this Page | 
Subscribe to this Thread
|
|
|
Thread Tools |
07-20-2008, 09:39 AM
|
#1 | |
|
AF Newbie
Join Date: Jan 2006
Location: Rochester, New York
Posts: 41
Thanks: 0
Thanked 0 Times in 0 Posts
|
A new noise....bearing?
Ok, I was coming home from a day trip out of town. About a 100 mile trip, it was very hot and humid outside. I was 5 miles from home and it started. I can only describe it as it sounded like the front driver side wheel would periodically stop or slow down enough for it to chirp like I slammed the brakes. I was driving about 45 mph in a straight line.
No service lights on dash came on. I just replaced the front rotors and pads and the drivers side caliper. So I'm thinking it's some kind of bearing. I'm not that mechanically incline, but I can replace the rotor and pads. How difficult is a bearing replacement( if that's the problem)??? It's a Z71 Silverado 2003 with 36K on it. I'd appreciate any thoughts. |
|
|
|
|
07-20-2008, 02:10 PM
|
#2 | |
|
Confoundingly Lucid
Join Date: Oct 2005
Location: Mesa, Arizona
Posts: 3,901
Thanks: 5
Thanked 31 Times in 31 Posts
|
Re: A new noise....bearing?
Did it start pulling to one side?
__________________
1988 9C1 - Modified LM1 @ 275HP/350TQ - TH700R4 - 3.08 8.5" Disc Rear - see it at http://www.silicon212.org/9c1! 2005 Crown Vic P71 - former AZ DPS - 4.6 liters of pure creamy slothness! 1967 El Camino L79/M20 old school asphalt raper Remember - a government that is strong enough to give you everything you need, is also strong enough to take everything you have. |
|
|
|
|
|
07-21-2008, 09:48 AM
|
#3 | ||
|
AF Newbie
Thread starter
Join Date: Jan 2006
Location: Rochester, New York
Posts: 41
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: A new noise....bearing?
Quote:
|
||
|
|
|
|
|
POST REPLY TO THIS THREAD |
 |
|
|
