 |
 |
 |
|
|
 |
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Dog Food | IgorSushko.com | Corporate |
 | | ||
| |
|
| Latest | 0 Rplys |
|
|||||||
 |
 Show Printable Version |  Email this Page | 
Subscribe to this Thread
|
|
|
Thread Tools |
06-26-2008, 01:54 AM
|
#1 | |
|
AF Newbie
Join Date: Jun 2008
Location: Cottonwood, California
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
|
02 Jeep Liberty heater-a/c electrical problem
The connection to the heater-a/c blower has overheated and burnt the insulation from the wiring. The pin connection is oxidized badly. I spoke with several parts houses and the Jeep Dealer, they all said this part is not available. Has anyone had this problem or have any suggestions as to a repair?
|
|
|
|
|
07-01-2008, 02:22 PM
|
#2 | |
|
AF Newbie
Join Date: Mar 2008
Location: Stillman Valley, Illinois
Posts: 92
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: 02 Jeep Liberty heater-a/c electrical problem
If it is the power wire at the motor, you could try cleaning the pin and solder the wire to it. Make sure you insulate it well afterward. This is the only idea I have if the correct connector is not available.
|
|
|
|
|
|
07-01-2008, 10:59 PM
|
#3 | |
|
AF Newbie
Thread starter
Join Date: Jun 2008
Location: Cottonwood, California
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: 02 Jeep Liberty heater-a/c electrical problem
Thanks, DAB77
I thought about that but the pins are recessed in a plastic socket and would be difficult to reach. I found a party in Texas that had a harness from a Jeep. It should be here soon. I hope this will solve my problem. Thanks again. |
|
|
|
|
|
|
POST REPLY TO THIS THREAD |
 |
|
|
