!996 Grand Am Door Swap Buick Wireing

[mouthyturtle]

Hello I was lucky enough to be given a good running 1996 pontiac Grand Am missing the driver side front door fender and headlight assembly. I already had a 1997 buick skylark with a blown engine. SInce I am currently very tight financially I decided the easiest thing to do would be to swap the doors and front Clip from the Skylark to the Grand AM (Not very good with engine swaps lol) Everything has worked well, had to mod the headlights a bit but otherwise pretty basic. My only dilemma has been trying to wire the Doors off the Skylark to the Pontiac. Both have Electric locks and Windows and the wires are the same colors save a few. I am asking if someone can please give me the door wiring diagram for both so I may figure out the wires prior to spark checking them! Thanks in Advance Chris (More time then Money )

[xeroinfinity]

Welcome to AF.

Here are a couple links that might help, not sure if they have the older models listed.

http://www.the12volt.com/

http://www.bulldogsecurity.com/wireing%20diagrams2.htm

Shouldnt be to difficult to wire though even without a wire diagram.

Hope that helps & Good Luck !