|
|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
| Performance Anything you ever wanted to know about boosting the performance of your Cavalier. |
![]() |
Show Printable Version |
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
|
|||
|
|||
|
I would bet it has probably been asked a thousand times, but...
I am new to the forum and couldn't find it. And yes i searched first. i am currently looking into swapping my motor, and was wondering if a 2.2 L4 2200 is replaceable with an LD9 (2.4 L L4), and what kinds of mods will be required. oh and btw, i own a 2000 pontiac sunfire coupe.
|
|
#2
|
||||
|
||||
|
Re: I would bet it has probably been asked a thousand times, but...
Motor, transmission, and engine wiring harness with ECU all from the 2.4L. You could also do an ecotec swap too with just what i mentioned above.
__________________
Please don't PM me with your J-body Issues. Post appropriately in the forums, and I will toss my opinion in your thread if I have anything to help. - Thanks! 2006 Chevrolet Trailblazer 2010 Glastron GT 205XL |
|
#3
|
||||
|
||||
|
Re: I would bet it has probably been asked a thousand times, but...
Yep and if you put a 2.4 in, BABY IT, or build the internals, I have been through 4 of the motors in under 40,000KMs.............they will not take any beating you give it.
__________________
|
|
#4
|
|||
|
|||
|
Re: I would bet it has probably been asked a thousand times, but...
Quote:
But if you're already going into the trouble of swapping, I'd say go with an Ecotec.
__________________
|
|
#5
|
|||
|
|||
|
Re: I would bet it has probably been asked a thousand times, but...
Both are great motors actually. and if you have been through 4 motors in 40,000 km's you are doing something way way wrong. I ran a 2.4 in a stock car and beat the living fuck out of the engine. it was completely 100% stock with 190,000 miles on it before I made it a hornet. the engine ran when I sold it after 2 seasons of racing.
2.4 has alot of good options but pretty much a dead motor as far as new parts the eco is new so where there might not be as much knowledge there is a good aftermarket for the engine |
|
#6
|
|||
|
|||
|
Re: I would bet it has probably been asked a thousand times, but...
actually looked into it and researched further, realized that if i am going to do a swap, why not put a 3400 in there. found help for that on JBO.
|
|
#7
|
||||
|
||||
|
Re: I would bet it has probably been asked a thousand times, but...
Where is the writeup on the 3400 swap? I have been looking into it and might do it.
__________________
|
|
![]() |
POST REPLY TO THIS THREAD |
![]() |
|
|