|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Dog Food | IgorSushko.com | Corporate |
|
| Latest | 0 Rplys |
|
|||||||
![]() |
Show Printable Version | Email this Page |
Subscribe to this Thread
|
|
|
Thread Tools |
|
|
#1 | |
|
AF Newbie
Join Date: Dec 2007
Location: Washington, North Carolina
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
|
98 monte z34 problem...
I have a 98 monte with the 3800 srII V6. Whenever I rev my engine past 4 or 4.1K RPM it stutters like the RPMs are maxed out and makes a jerking motion and sounds as if its misfiring. Also it stalled out a couple times the other day for no apparent reason. The SES light has been on and the comp is popping a code for the EGR valve since I got the car two weeks ago. Would a faulty EGR valve cause this kind of behavior? It's also loosing coolant somewhere (smells like it might be burning it...[Hopefully not the head gaskets...])
Any help is GREATLY appreciated. |
|
|
|
|
|
|
#2 | |
|
AF Regular
![]() Join Date: Jun 2005
Location: elkhart, Iowa
Posts: 123
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: 98 monte z34 problem...
A very common problem with that engine is the upper intake leaking coolant
inside and outside the engine. The EGR tube in the intake melts the plastic and causes a coolant leak. Look around the intake around the throttle body area for a leak.
__________________
"The Constitution shall never be construed...to prevent the people of the United States who are peaceable citizens from keeping their own arms." -Samuel Adams, 1786 |
|
|
|
|
|
|
#3 | ||
|
AF Newbie
Thread starter
Join Date: Dec 2007
Location: Washington, North Carolina
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: 98 monte z34 problem...
Quote:
Tomorrow my mechanic will take a thorough look at it for me and hopefully be able to fix all the major problems with it... I love my monte and don't want to get rid of it... |
||
|
|
|
|
|
#4 | |
|
AF Newbie
![]() |
Re: 98 monte z34 problem...
Its possible your EGR vavle is just dirty. Very easy to clean. Carbon builds up in the butterfly valves and causes them to stick. Check your EGR lines and Vaccum lines as well. Plastic does melt.
__________________
1995 Monte Carlo Z34 DOHC 1989 Silverado 350cu TBI Aaron |
|
|
|
|
|
![]() |
POST REPLY TO THIS THREAD |
![]() |
|
|