Getting out of the scene sale. HKS, Corbeau, turbonetics, autometer, schroth, spearco

[itsanothercivic]

Heres a list of what I am selling. Prices are negotiable but please no lowballing. If you have questions please contact me at [email protected]

~HKS SSQV BOV-$100
~HKS Type 0 turbotimer-$75
~Spearco FMIC (roughly 20?by8by3) w/angled endcaps-$500
~STR polished B-series fuel rail-$50
~M&W Pro 10 ignition box-$400
~Autronic SMC engine management-$1200
~Corbeau ForzaII black race seats-$400
~Corbeau Honda sliders-$100
~Schroth black 4pt harness’-$200
~Autometer Sport Comp. 2” gauges:
Electric coolant temp-$75
Electric oil pressure-$75
Electric oil temp-$30
Air/Fuel-$40
Boost-$50
EGT-$100
~Autometer Pro Comp. 3 3/4” gauges:
Tach (10,000rpm)-$100
Speedo (160mph)-$100

~Custom fiberglass gauge pods for 88-91 Civics (triple pod for upper center air vents, triple pod in place of ashtray, single pod in gauge cluster surround, gauge cluster itself to hold (2) 3 3/4 gauges, shiftlight and turbo timer)

~Autometer dual A-pillar pod for 99-91 Civic
~Moroso battery box-$75
~MSD cap, coil w/bracket, and black 8mm wires for B-series-$100
~88-00 Civic adjustable ball short shifter-$50
~Type R style shift knob-$15
~carbon fiber/polished e-brake handle-$10
~(2)Falken Azenis 205/50/15’s w/ good tread-$75
~(2)G60 Sebring wheels w/Toyo Proxes FZ4’s w/ good tread-$100
~Place Racing front crossmember for 88-91 civics-$75
~Place Racing B-series shift linkage for 88-91 civics-$75
~Place Racing engine mounts for B-series into 88-91 civics-$75
~Turbonetics manual boost controller$50
~Turbonetics silicone couplings:
(2) 2” 90’s-$40 each
2” coupling-$20
2”-3” adapter coupling-$30
~Set of Scion TC blackies-$50

~B16A swap w/ y1 cable tranny...Motor was rebuilt about 10k miles ago with:
Hasting piston rings, Race Engineering blockguard, OEM Honda
valve seals, head gasket, timing belt, rod bearings, head studs,
OE oil pan gasket,(oil pan has been tapped for oil return but can
be plugged with -8AN plug) OE valve cover gasket (valve cover
has nipple welded on for Evac. setup and is powdercoated black),
comes with STR cam gears and cam seal, Unorthodox Racing
single belt underdriven race crank pulley and lightweight alt.
pulley. Has rebuilt starter and alternator from about 10k ago as
well. DOES NOT INCLUDE: fuel rail, fuel injectors, distributor &
some misc. sensors. I will throw in another set of b16a rods and
pistons, an extra oil and water pump, black carbon canister,
some misc. sensors I have laying around as well as some other
parts that you could use but I no longer want or need laying
around. $2000

~Energy Suspension Master Kit for 88-91 civics (missing front LCA kit, pt#16.3103. front shock bushing set, pt #16.8102. and shifter bushing set. $50
~Powdercoated black IC piping-20
~Powdercoated black B-series cable tranny casing-$100
~YS1 cable B-series tranny-$400

~ZC style carbon fiber hood for 88-91 civics w/ Sparco hoodpins. Has a lot of cracks in clear coat ONLY. Has no place for latching mechanism so you must use hoodpins. Webbing on underneath was cut away for clearance for my turbo. Great lightweight hood but unless you don’t mind the crack which I didn’t, I would suggest getting it painted and having a nice light hood for cheap-$75

~Bare b16a2block except for crank-$50
~b16a2 oil pump with less than 12k on it-$25
~b16a2 water pump with less than 12k on it-$25
~90-93 GSR steering wheel (no airbag)-$25
~4 door GSR floormats-$50

~Custom stock front bumper from 90-91 civic hatch (plastic welded bottom of another bumper on to lower the front while retaining stock appearance as well as plastic welded pieces on to the sides of openings to just allow FMIC to show. (Will sell bumper, FMIC, frame brace/FMIC protection bar, and modified bumper bracket as a package but will only work on 88-91 civics) Stock or aftermarket lip can still be installed on modified bumper

~Canadian and US style door panels for 88-91 civics
~I’m parting out an entire 90 civic hatch so I have a ton of stock random parts as well....ie. headlights, doors, glass, dash, wiper motors, seatbelts yada yada yada.

***I think my suspension is spoken for but I will put this on here in case somebody else is interested and my friend falls through. This will be sold as a complete unit ***
~Tokico Illumina 5way adjustable shocks, Skunk2 coilovers, Integra brake upgrade up front w/ slotted rotors and green stuff pads, Energy suspension LCA bushings, front shock bushings, sway bar bushings, new tie rod ends on steering rack, all new front ball joints, rear drums have been completely rebuilt and it has an adjustable camber kit. $900

[thefooshmeister]

hey do you have any of your d series motor parts layin around?? i need a girdle from a d16a6 bottom end

[itsanothercivic]

I may have a girdle for a z6. I'll take a look and get back to you on that by the Saturday at the latest.

[thefooshmeister]

ive already got a z6 girdle and it wont work with the a6 oil pan..thanks anyways man

[FrodoGT]

Too bad you dont have the whole z6 lol..

[itsanothercivic]

I had an army of D series motors but they were all scooped up by my buddy.

[derekryans]

will your speedometer fit in my car? it's 99 civic...my gauge cluster is good but the print circuit board went bad and for some odd reason the one Honda sent doesn't match my car. figured i'd just buy a new gauge cluster...it does light up at night right?

[itsanothercivic]

Its an Autometer Pro Comp 3 3/4 10,000rpm tach. Part number 5161. You can look up all the details on http://www.autometer.com. It does light up, and depending on how you wire it you can have it turn on with your headlights, on a switch or you can have it on all the time. You can change the color of the light either by different colored bulbs, painting the bulbs, or buying bulb "condoms". You will have to do some mods to make it work in your cluster. It is a cable driven tach so you need to figure that out. You could buy the tach, speedo and fuel level gauges and make an fully custom gauge cluster like I did. LEDS for high beams and turn signals. You can incorporate anything you want that would fit into it.

[derekryans]

thanks for all the details! i'm sorry but what you told me has been like...french to me. i'm a car idiot lol. but i didn't wanna leave ya hanging so yeah...sorry i can't buy it because i wouldn't even know where to start with doing the things you just said. thank you though! i'm sorry for wasting your time.

[Gunnard]

Hey.

I'm interested in adding more things to the interior of my auto 91 civic hatch. Was wondering what all is still for sale? Interested in custom gagues, etc.