Red 60 years tribute: 288 GTO WIP

[Uninen]

Hello!

First I'd like to say that I'm not a huge Ferrari fan, but this 288 GTO has influenced me since I was little, both styling and performance! And I also have to say -eventhough it is Italian (I think I just pissed them off )- Ferrari has allways influenced someway to automotive culture and innovation. They're allways been the top notch, hi-tek, performance car make in the market. So this is my tribute to Ferrari, celebrating it's 60 year journey -and still counting- in automotive history.

The starting point. Revell's Ferrari 288 GTO packs according the box 90 parts (that's not much). I'm going to add Acu Stion's PE set (made for fujimi kit). Also I'm going to plumb the engine and possibly open the front deck lid and since the kit isn't that good it needs quite a bit work done to make it look even half decent. Well lets move on to the pictures, I don't wan't to bore You with my blabbering, here you go:

the box


the few parts included in the box + the PE set


the body (needs work, A LOT!)


the air vents need to be opened up


there's a minor sink valley (yes, it's about half inch wide that's why it's not a sink hole) but You probably can't see it since it's such a bad photo


the seats need cleanin and some sanding and filling, well U get the picture literally


oh my god, do you really call these thingies turbo's, Revell? Something needs to be done with these, FAST!


the rims. Yes I allready stripped the chrome off, going to paint them aluminium plus they have to be widened in the back and narrowed in the front


the PE set by acu stion


the fronts air grille's need to be opened, there are quite a lot of sprue in them


Brrrrhh. Did You know they call these tires at Revell?


Now that's better. I borrowed these from Marui's 512 BB


Tha-tha-that-THAT'S IT FOLKS! For now, I have some progress pics waiting allready. Going to post them soon. Stay tooned comments and critisism are welcome. And I appologise if I affended any Italians (it wasn't personal you are lovely people).

[drunken monkey]

quit the beating on Revell: that started life as an Italeri kit.
As usual though, inc ase you haven't read/heard about it before; test fit the exhaust/turbo/inatake set up carefully before commiting to the glueing.
You also have to make sure that the top half of the rear subframe and the filterboxes fit.
It's a real pain to get to that stage and realise that it's all skewed...

[Uninen]

Thanks for the advice! I'll fit them before gluing. And I didn't know it was originally Italeri's kit, so I apologise for that.

[KE70]

All the best to you.

[Uninen]

Right, here's sum progress. I took the photos yesterday after I made one bit further etc. so this could be quite long thread after all. Well here are the pics:

I cut the front grille off, hence there'll be a PE part (well actually several bits, 7-8 parts)


opened those side vents a tad


same on the other side


opened those front grille's sprues


here's the rear bumber, there'll be pe mesh on those holes


That's it for the time being. Now I'll have to upload more of those pics to my photobucket so I can post em ere! Iriee, big up!

[Uninen]

Here's a bit more progres pics.

Here You can see the problem in the front


sanded a bit...


filed...


and yet again sanded, problem solved. I also had to scribe the panel lines back


the wheels dechromed, they also need sized front and back


That's it. Next I'll need to do some progres to get something to update about.

[YoShImUrA_53]

Any news on this beautiful italian?

[Uninen]

Nope, sorry haven't had the time. But I'm planning on tackling this one once again soon.

[YoShImUrA_53]

Will watch this space. Cheers!