97 Taurus temp control

[Hammer90]

Hi, guys and gals,--searched every thread, but couldn't find problem like mine. The dial control for the hot/cold doesn't seem to work. All other controls are fine,but my problem is I ONLY get heat as opposed to everyone that can't seem to get heat. Figure its the control itself--how do I get the darn panel off to replace it---or do you think it is something else causing the problem? Thanx---later

[drdisque]

is it HOT everywhere on the dial not just warm? When you turn on AC does it get colder?

I don't think the problem is the panel itself, I think its the door that diverts the airflow over the Heater core.

[Hammer90]

Doctor, no matter where i turn the control dial the temp remains the same ---always hot---A/C control has no effect--nor does the vent setting--continues to blow hot air no matter what--later--Hammer90

[drdisque]

then I'm thinking either the dial is disconnected on the back or corroded or the heater core air door is broken or stuck (which is a pain in the ass to look at)

[Hammer90]

Thanks. I'll try the control first, but one more question ---Is there a special tool to release those spring clips that hold the faceplate for the climate controls. I popped a stereo out of my Explorer once using 6d finish nails, but there has to be an easier way, no? I am a fast carpenter, but only a half-fast mechanic. Later......

[fastcar_racer]

Hello! Guys. I'm just new here. Looking forward to spending time with you.


_____________________
Kitchie
Download Hewlett Packard service manuals