|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
#1
04-21-2007, 03:16 AM
|
||||
|
||||
|
no vtec
i have a 97 ek9 with a 97 prelude swap...but the biggest problem is that i have no vtec...car runs fine but theres no vtec at all...tried different harnesses ecu's ect...but still no vtec...any help or ideas would be great....thanks
|
|
#2
04-21-2007, 04:24 AM
|
|||
|
|||
|
Re: no vtec
It could be a number of things. Is your oil level ok? Any dents in oil pan? Loose grounds? wired up correctly? i had just done an h23-h22 swap and i had no vtec either. it was due to wiring that we needed to splice into harness because we couldnt find the wire in engine bay anywhere. after that. i swapped ecu's and i run fine now. vtec and all. hope i could help
|
|
#3
04-28-2007, 03:50 AM
|
||||
|
||||
|
Re: no vtec
thanks for the response...ill check those out...
|
|
 |
POST REPLY TO THIS THREAD |
 |
|
|
