|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
| Eclipse Problem Diagnosis Got a problem you can't fix? Post here and one of our members will answer as soon as possible. |
 |
 Show Printable Version | 
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
03-14-2007, 01:53 AM
|
|||
|
|||
|
Help 95 eclipse head on a 97 gst
so i have a 95 turbo head on my gf's 97 gst does anyone know how to use the cam sensor considering there isnt one on the pass side of the head only on the cam gear if you can help please let me know
is there anything i can do the car is completely put back together and it wont start theres no spark 
|
|
#2
03-14-2007, 02:17 AM
|
||||
|
||||
|
Re: Help 95 eclipse head on a 97 gst
Im not 100% on this but I think you would need to use the cam sensor from the 97 CAS on that head and not the one from the 95 and that also means you might have to get the intake cam drilled and tapped. But if you are looking for where the CAS is for the 95 it is over either mounted on the crankshaft itself or its right next to it from what I remember.
__________________
1998 Eclipse GSX 6 Bolt swap MHI Big 16g FP Race Manifold Apex'i N1 Cat-back Apex'i N1 Downpipe Walbro 255 fuel pump GReddy Type S BOV Turbo XS Boost Controller Balance Shaft Elimininator ACT 2600 RRE 11lb No Name Flywheel Prothane Motor Mounts Tokico Illuminas Advanced Handling Kit RRE Front and Rear strut tower bars RMDSM Front and Rear Sway Bars TRE Stage 2 Tranny ARP Head Studs, Main Studs, Rod bolts
|
|
|
POST REPLY TO THIS THREAD |
 |
|
|
