|
|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
#1
|
|||
|
|||
|
91 octane limits
I did a search and it looks like 14.5PSI is the limit, but that is for 93 octane correct? What is the most you can boost and still be safe with 91 octane?
Also what is the boost set at for 92 stock stealth TT?\ Thanks |
|
#2
|
||||
|
||||
|
Re: 91 octane limits
Stock it's around 10 maybe. Get a real boost gauge before you do anything other than the free boost mod. Also the 14.5psi thing depends on alot, I think it's foolish to be boosting that high without datalogging. Since you have a first gen, a datalogger should be your first mod. On 91 octane, I wouldn't go higher than stock levels. Even on 93 I stick with 13.5/14
__________________
96 3000gt vr4 -K&N FIPK -Proboost mbc -Cusco front + rear strut bars -Greddy type-s -ATR downpipe -no cats -15Gs, 3sx aluminum pulley, FMIC, SAFC, walboro pump, EVO 560ccs, and Meth Injection Kit all waiting to go in shortly. Your 1996 Mitsubishi 3000GT VR-4 is the 92nd out of the 315 that were made that year. Only 21 of which are exactly identical. |
|
#3
|
|||
|
|||
|
Re: 91 octane limits
I have a boost guage and controll, gutted cats and downpipe. So would 12PSI be risky on 91 octane?
and for a data loger how is this http://www.3sx.com/store/comersus_vi...dProduct=26296 Last edited by compaqpunch; 01-31-2007 at 10:34 PM. |
|
#4
|
||||
|
||||
|
Re: 91 octane limits
You can get away with 12psi on 91 octane, granted every car is different, and alot of factors can cause knock, so when people say you can get away with x amount of boost, or should be seeing x amount of power...it's always relative, and modding your car is your own responsibility.
As far as the LM1, I have no personal experience with it whatsoever. Linebckr has some great posts on dataloggers I would check out. They are definantly cheaper, plus scanning over that description, it seems you have to buy something additional to be able to datalog in real time. Meaning, if you get a palm pilot off ebay adn some free/cheap software, you can actually view what is being datalogged as you are on the road. LM1 you need to take home and hook up to a computer, or additionally get a laptop or palm or whatever to view it in hte car. Lastly, I don't know all the parameters the LM1 scans for. I didn't see any mention of knock counts, the ability to control specific cylinders, the ability to pull codes from the ecu, etc.
__________________
96 3000gt vr4 -K&N FIPK -Proboost mbc -Cusco front + rear strut bars -Greddy type-s -ATR downpipe -no cats -15Gs, 3sx aluminum pulley, FMIC, SAFC, walboro pump, EVO 560ccs, and Meth Injection Kit all waiting to go in shortly. Your 1996 Mitsubishi 3000GT VR-4 is the 92nd out of the 315 that were made that year. Only 21 of which are exactly identical. |
|
#5
|
|||
|
|||
|
Re: 91 octane limits
Thanks allot. i'll prob just put in 93 and turn the boost to 13
|
|
#6
|
|||
|
|||
|
Re: 91 octane limits
i love keeping cars stock, just my opinion. tho some cars when modded are to the better, such as ours, the civic, is almosst always overdone
|
|
#7
|
||||
|
||||
|
Re: 91 octane limits
^you've gotta remember, like igo said, a lot of things are variables in this formula. A car can knock for several reasons(altitude, intake temp, ignition advance, bad gas, etc...), so the datalogger is definitely a neccessity before tuning.
__________________
Quote:
1991 Eagle Talon TSI - Broken Head removed, block broken, trans in hatch ![]() 1991 Eagle Talon TSI AWD- in pieces 3" exhaust, rebuilt bottom end Project: Assemble the Eagle is underway... and now with AWD 2003 Lancer Evo 1630hp/1593ft lb tq |
|
![]() |
POST REPLY TO THIS THREAD |
![]() |
|
|