-
Grand Future Air Dried Beef Dog Food

Carnivore Diet for Dogs

Air Dried Dog Food | Real Beef
Go Back   Automotive Forums Car Chat > Chevrolet > Avalanche | C&K | Silverado | Suburban | Tahoe > Tahoe
Register FAQ Community
Reply Show Printable Version Show Printable Version | Subscription Subscribe to this Thread
 
Thread Tools
  #1  
Old 11-18-2006, 06:25 PM
glenncof glenncof is offline
AF Regular
 
Join Date: Dec 2003
Posts: 180
Thanks: 0
Thanked 0 Times in 0 Posts
recovering leather seat pad

My 1997 Tahoe needed a new leather seat pad cover on driver side.

I got one from an ebay seller J&D Upholstery, 662-335-9461. Hog rings / pliers can be gotten at Orchards/Sears in chain link fence section.

Price was $150 + 15 shipping. BTW, dealer wanted $450 w/o installation.

Happy to report it was easy job. This assumes you have power seats, if you don't it will be even easier.

1) Disconnect wires and remove a plastic cover.
2) Pull four mounting bolts & remove seat.
3) Remove power seat track, 4 bolts
4) Remove seat recline handle & power switch unit
5) Remove hog rings ~12-14
6) Remove cover starting from the back, slide power switch unit thru hole and place into seat
7) Let new cover sit in the sun for awhile to soften it somewhat
8) Install cover over seat, tighten back side velcro strips as much as possible
9) Clip black plastic side-strip (outer-side) then attach inner-side with hog rings.
10) Clip front side with hog rings, then go back and dress/re-tighten back side and add hog rings.
11) Re-install power seat track
12) Locate shaft for recline leaver, cut hole, install lever.
13) Locate power seat switchs & use them as a guide to cut a straight line for an opening to pull the switch unit thru. Install the screws to hold switch unit.
14) Re-install seat and connect wires.
Reply With Quote
  #2  
Old 12-12-2006, 11:35 AM
Kizar_Sozay Kizar_Sozay is offline
AF Newbie
 
Join Date: Dec 2006
Posts: 14
Thanks: 0
Thanked 0 Times in 0 Posts
Re: recovering leather seat pad

I had mine repaired. It had worn on the outside drivers side from sliding in and out. Local shop did mine for $175. Explained to me that the seat stitching was a French seam and was a bit more difficult. They did a single panel and while its not an exact match, looks good. Happy to find the source you posted for future.
Reply With Quote
  #3  
Old 12-14-2006, 09:52 PM
LimitedTahoe00 LimitedTahoe00 is offline
AF Newbie
 
Join Date: Dec 2006
Posts: 19
Thanks: 0
Thanked 0 Times in 0 Posts
Re: recovering leather seat pad

I Have A 2000 Tahoe Limited. Just Had My Broken Driver Seat Welded.

Removing The Bottom Cover Was Pretty Easy. The Driver Pad (crossing Wires Under The Cushion) I Could Not Save. Took It An Interior Shop And They Put It Back Together For Me For $65. I Wish I Would Have Read Your Post Before Going Off And Taking A Part My Seat. It Would Have Saved Me Some Time.
Reply With Quote
 
Reply

POST REPLY TO THIS THREAD

Go Back   Automotive Forums Car Chat > Chevrolet > Avalanche | C&K | Silverado | Suburban | Tahoe > Tahoe


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 09:45 PM.

Community Participation Guidelines | How to use your User Control Panel

Powered by: vBulletin | Copyright Jelsoft Enterprises Ltd.
 
 
no new posts