|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
| Latest | 0 Rplys |
|
|||||||
![]() |
Show Printable Version | Email this Page |
Subscribe to this Thread
|
|
|
Thread Tools |
|
|
#1 | |
|
AF Newbie
![]() Join Date: Dec 2005
Location: Kansas City, Missouri
Posts: 20
Thanks: 0
Thanked 0 Times in 0 Posts
|
Cold start problems
Has anyone had problem with there truck not wanting to idle only on cold starts, as in when the temp. falls below 35 degrees. Once the engine has generated enough heat it is fine and idles good and is good for the rest of the day. But come next morning after it has sat all night it does the same thing. When the avg. temp is higher like in the summer time there is no problem at all. I have an 01 Z71 with the 5.3L. Where should I look to fix this issue?
|
|
|
|
|
|
|
#2 | |
|
AF -Advisor
Join Date: Aug 2005
Location: Cedar City, Utah
Posts: 806
Thanks: 0
Thanked 1 Time in 1 Post
|
Re: Cold start problems
Take it to a shop and have the coolant temp sensor checked, if it is not reading the correct temp the it will cause this problem. If the cts tells the computer that it is warmer than it is it will not go in to the cold start mode.
__________________
NO 4 N JUNK ![]() 1994 GMC K1500 XC 5.7L 2008 Chevy Impala LTZ |
|
|
|
|
|
|
#3 | |
|
AF Enthusiast
![]() Join Date: Mar 2005
Location: Lakes Region, New Hampshire
Posts: 530
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: Cold start problems
not enough fuel for those morning starts. Sounds like the fuel regulator. That is a common problem on these trucks.
__________________
2001 5.3 LS Stock 6 channel Alpine 3566 Amp Jason Extreme Slam Camper Shell Michellin X-Radials 79K Miles |
|
|
|
|
|
|
#4 | |
|
AF Enthusiast
Join Date: Aug 2005
Location: Aldie, Virginia
Posts: 1,064
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: Cold start problems
You may want to use thiner oil.. When your engine is cold that oil is much like sludge as is harder to move around and can cause rough idling. use 5w30 if you are not already.
__________________
![]() ![]() 2000 Silverado Z71, 5.3L, K&N GenII Air Intake, Y-pipe Exhaust (no muffler), Bosch Platnium +4 plugs, 242k miles and still running. |
|
|
|
|
|
|
#5 | |
|
AF Newbie
![]() Join Date: Dec 2005
Location: Kansas City, Missouri
Posts: 20
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: Cold start problems
Thanks, I will try these things and see if it helps. I took it to the shop last winter and they couldn't get it to rough idle. So to them it looked good, and without it throwing a code they didn't really know where to look other than to check for vacuum leaks which they found none. I will give these a try. Thanks.
|
|
|
|
|
|
|
#6 | |
|
AF Newbie
![]() Join Date: Dec 2005
Location: Kansas City, Missouri
Posts: 20
Thanks: 0
Thanked 0 Times in 0 Posts
|
Re: Cold start problems
well i got the problem fixed, it was the plenum gasket (intake manifold gasket) another common problem with GM. thanks for the input.
|
|
|
|
|
|
![]() |
POST REPLY TO THIS THREAD |
![]() |
|
|