|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
| Problem Diagnosis Got a problem you can't fix? Post here and one of our members will answer as soon as possible. |
 |
 Show Printable Version | 
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
10-31-2006, 07:51 PM
|
|||
|
|||
|
1993 S-10 Blazer Thermostat Replacement?
Hello, I Have 1993 S-10 Blazer. The Temperature Reading Was Always At 200 Degrees, But Just Started Reading 150 Degrees Now. Still Heats, But Not As Warm As Before. Is This The Thermostat? I Know This Thermostat Has Between 40,000 And 50,000 Miles On It. When Replacing It, Do I Have To Take The Whole Shroud Off, Or Can I Get At It By Just Taking Off The Air Intake? Are There Any Tricks To Replacing It? Thanks For Any Info!!
Last edited by CENA; 11-01-2006 at 01:28 AM. 
|
|
#2
10-31-2006, 10:30 PM
|
||||
|
||||
|
Re: 1993 S-10 Blazer Thermostat Replacement?
yea thats a bad stat or a bad stat seal. what engine do u have, TBI or CPI?
__________________
2000 Chevy Blazer ZR2 Performance Mods: Numerous Suspension Mods: Some, but not enough Exterior Mods: Just Right 1987 Buick Turbo T Dark Red Low 11 sec sleeper  .030 4.1 block, PT6262E, & other odds and ends.... My Cardomain
|
|
#4
11-21-2006, 06:31 AM
|
|||
|
|||
|
Re: 1993 S-10 Blazer Thermostat Replacement?
Did it. It was easy. Intake off, and removed bracket from belt tensioner and was easy to get at. I noticed there was a 190 temp in there which had been put in by the dealer when I purchased it. The OEM equipment calls for 195. That is what I put in it now. My gas mileage went up now too. I was driving it for 2 years with a slowly failing thermostat. Like I said it always was running at 200 degrees when I got it, and then after 2 years it went up to 210. Now it is back at 200 and doesn't move.
|
|
|
POST REPLY TO THIS THREAD |
 |
|
|
