|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#1
10-25-2006, 05:54 PM
|
|||
|
|||
|
fuel pressure
i have a chance to trade that bronco in my sig for a 1993 chevy pickup with a 5.7L V8 TBI the truck has been totaled but the engine is good....if i did this i would want to put this engine into my 84 camaro fuel injection and all...my question is this ..............
how much fuel pressure does the TBI need? so i can know what pump i need to put in it thanks alot
__________________
1984 Camaro 5.7L 350 700R4 Holley 650 Cfm Edelbrock Performer Intake-Manifold Crane Cams Duration @ .050": 204/214 Lift:420/442 Summit HEI Distributor Hedman Shorty Headers Hedman Y-pipe Dynomax Turbo cat-back NOS Decal VTEC Decal 
|
|
#2
10-25-2006, 06:10 PM
|
|||
|
|||
|
Re: fuel pressure
TBI=13lbs
__________________
If it ain't broke.......screw with it till it is.  Even at a Mensa convention,
Someone's the dumbest person in the room.
|
|
#3
10-25-2006, 06:28 PM
|
|||
|
|||
|
Re: fuel pressure
13? i was discussing this with my dad yesterday and i was thinking that tbi was a relatively low pressure FI like about 15 or so.
__________________
1984 Camaro 5.7L 350 700R4 Holley 650 Cfm Edelbrock Performer Intake-Manifold Crane Cams Duration @ .050": 204/214 Lift:420/442 Summit HEI Distributor Hedman Shorty Headers Hedman Y-pipe Dynomax Turbo cat-back NOS Decal VTEC Decal
|
|
#4
10-25-2006, 11:08 PM
|
||||
|
||||
|
Re: fuel pressure
it is also ALOT of work to put a 350 in a 2.8 car. I would trade and sell the truck for parts or thw whole motor.
__________________
95 Z71 Silverado 4x4 ext. cab Mods- Flowmaster Exhaust,Intake
|
|
#5
10-26-2006, 09:03 AM
|
||||
|
||||
|
Re: fuel pressure
Quote:
|
|
#6
10-26-2006, 09:17 AM
|
||||
|
||||
|
Re: fuel pressure
From what I've seen, the TBI220 on a 350 usually requires 11-13 PSIG. The same TBI on a 454 requires 17-19 PSIG.
__________________
Permanent seat assignment on the Group W bench... Automotive Forums Survival Guide
|
|
#7
10-26-2006, 12:02 PM
|
||||
|
||||
|
Re: fuel pressure
Don't put a stock replacement pump back into your camaro. You should get at least a TPI fuel pump and probably something that flows a little bit better like a Walbo 255. Fuel pressure on the 305 and 350 are the same, but the injector sizes are different. What kind of power your making and injectors your using will determine what fuel pressure you will need. If you have the 350's stock sized injectors and stock motor you'll only need about 10-13 psi.
__________________
 '91 RS, forged LT1, GTP heads, blower cam, AFR Hydra-Rev kit, ram air intake, SLP 1 3/4 headers and 3" y-pipe, 3" Dynomax exaust, Yank 2800 TT stall converter, Strange 3.73 gears with Zexel-Torsen LSD, ect, ect...
|
|
 |
POST REPLY TO THIS THREAD |
 |
|
|
