ignition fuse

tundraathome · 09-10-2010, 11:24 AM

i have a 95 ford econoline that keeps blowing the 60 amp ignition fuse when replaced it will fire up ,run for about 30 seconds and blow it again any ideas sam

tundraathome · 09-10-2010, 04:24 PM

did some more checking and found that the fuse [60a] would not blow if the key were in the off position, but would in the on position whether the engine were running or not,, pulled the grey connector apart that feeds the steering column, switch etc and got my voltage with no problem.. touched a wire from the +post to a heavy tan yellow wire in the connector and heavy arcing and also showed a almost solid grd. with my meter sam

tundraathome · 09-11-2010, 03:32 PM

does anyone have a diagram of the 60 amp ignition circuit as to exactly what it feeds if i had that i,m sure that i could figure it out thanks sam

GET HEALTHY AFFORDABLE DOG FOOD

DEVELOPED BY THE AUTOMOTIVEFORUMS.COM FOUNDER & THE TOP AMERICAN BULLDOG BREEDER IN THE WORLD THROUGH DECADES OF EXPERIENCE. WE KNOW DOGS.

CONSUMED BY HUNDREDS OF GRAND FUTURE AMERICAN BULLDOGS FOR YEARS.

NOW AVAILABLE TO THE GENERAL PUBLIC FOR THE FIRST TIME

PROPER NUTRITION FOR ALL BREEDS & AGES

POST REPLY TO THIS THREAD