|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
 |
 Show Printable Version | 
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
08-29-2006, 09:36 AM
|
|||
|
|||
Need programming instructions for keyless entry remote - 2004 Elantra
Can anyone point me in the right direction? This is worst than taking my SAT.
 I need to program a remote that was purchased on eBay for a 2004 Hyundai Elantra. The company that I purchase it from doesn't have programming instructions.
|
|
#2
08-29-2006, 03:21 PM
|
|||
|
|||
|
Re: Need programming instructions for keyless entry remote - 2004 Elantra
Well, I poked around at the HMAservice site, and as far as I can tell you need a programming tool to be able to do it. The document I found references the 2001 Elantra, but I assume it means 2001 and up. I'm not 100% sure, that's just what I was able to find. Check with a local Hyundai dealer to find out for sure.
__________________
2005 Tiburon SE 2.7L V6 6sp manual 2008 Santa Fe Limited AWD, 3rd row, Nav
|
|
#3
09-04-2006, 02:29 PM
|
|||
|
|||
|
Re: Need programming instructions for keyless entry remote - 2004 Elantra
I am 100% sure: the dealer HAS to do it. 2001-2003 were owner-programmable; 2004-2006 require the hi-scan tool with keyless adapter that only the dealer has.
It's a ten minute job but they will probably charge you a half hour of labor at least. One particularly wiley owner I know went in and said the remote "just stopped working". Since his car was still under the 5 year, 60,000 mile warranty, the dealer programmed it for free as a warranty fix. If your car has less than 60,000 miles on it, you may want to try that angle.
|
|
|
POST REPLY TO THIS THREAD |
 |
|
|
