|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Fresh Beef Dog Food | IgorSushko.com | Corporate |
|
#2
08-04-2006, 12:13 AM
|
||||
|
||||
|
Re: front wheel bearing
Welcome to AF.
For special tools you will need a torque wrench. The axle nut will be torqued to someweheres around 150 - 180 ft-lbs depending on what the hub manufacturer or GM specifies. 36mm socket and breaker bar to remove the axle nut. And possibly a hub puller to get it off the spindle. For rest like brakes (caliper and bracket) and the hub bolts just standard metric sockets with 3/8" drive ratchet and extensions. Also, when completed the wheel nuts should be torqued to 100 ft-lbs.
__________________
'08 Pontiac Grand Prix GXP (Dark Slate Metallic) - LS4 5.3L V8 '02 Oldsmobile Alero GL2 - LA1 3400 V6 '99 Buick Regal LS - L36 Series II 3800 V6 '03 Honda CR250R MX - 2 Stroke 250cc '97 Pontiac Grand Prix GTP - L67 Series II 3800 V6 Supercharged (Sold) Timeslip 08/12/06 AF Community Guidelines 
|
|
 |
POST REPLY TO THIS THREAD |
 |
|
|
