|
| Search | Car Forums | Gallery | Articles | Helper | Air Dried Beef Dog Food | IgorSushko.com | Corporate |
|
|||||||
| Eclipse Problem Diagnosis Got a problem you can't fix? Post here and one of our members will answer as soon as possible. |
 |
 Show Printable Version | 
Subscribe to this Thread
|
|
|
Thread Tools |
|
#1
07-09-2006, 01:15 AM
|
|||
|
|||
|
Halo Projector Lights
I installed new halo projector lights on my 98 eclipse and my brights are stuck on and they won't turn off. The wiring harnesses did not match up right so i cut and spliced the wires together.
Last edited by EricSchnabel; 07-09-2006 at 02:41 AM. 
|
|
#2
07-09-2006, 05:47 AM
|
||||
|
||||
|
Re: Halo Projector Lights
Congratulations.
__________________
 Build on hold until I get a good paying job, either in school or once I get out. At that time a full tear down and complete rebuild should be in order. The Purple People Eater will ride again... January 2011 can't come soon enough.
|
|
#4
07-09-2006, 11:03 AM
|
|||
|
|||
|
Re: Halo Projector Lights
Never mind i got it all taking care of. I had no low beams.
|
|
#5
07-09-2006, 11:09 AM
|
||||
|
||||
|
Re: Halo Projector Lights
Wow...
I think I know what you meant before you edited your first post. My halo's were some jacked up connectors that had to be hardwired to my harness. It was indeed a strange wiring setup but I wired mine to have high and low beams on whenever the highs were on and normal when the lows were on. They worked damn good after that.
__________________
-Brian
|
|
|
POST REPLY TO THIS THREAD |
 |
|
|
