holden monaro

[acemotorsport]

where can i get this kit to convert a pointiac gto to an aussie monaro

[Nobbys Nuts]

You need to get hold of Stump. He is a member here as well. Do a search for his posts and send him a PM.
Cheers
Tony

Originally Posted by acemotorsport

where can i get this kit to convert a pointiac gto to an aussie monaro

[malscar]

Scaleautomobilia has them on their website.
sn SM001 $26
http://www.scaleautomobilia.com.au/

[viperofoz]

The pic shows a conversion of the kit supplied pontiac bumper into a monaro peice.

The resin parts cast by Stump and available from scaleautomobilia are for
HSV GTO and are very different from the stock Monaro bumpers, but it does include a decent RHD dash.

I'm not aware of anyone who has produced the stock Monaro bumpers but you could convert the kit peices yourself with a bit of work and some good reference pics from the web.

My own conversion is at about the same stage as the pic shown in the above post.

[viperofoz]

These are pics of the front and rear HSV GTO bumpers from Stumps conversion set, as you can see, they are very different to a Holden Monaro.

Note, rear bumper still needs to have the resin casting plug removed from its lower edge.




I wont be using these on my build as i will be going the stock route, so they are available for sale or trade if anyone is interested.


Here is the start of my stock conversion.



Regards, Dan

[AussieGTS-T]

even though i am a ford supporter i thought about building one as one of the 24hr 427, but i don't think i will to many GT cars and not enough time.

[Mogster]

Does the transkit from Scaleautomobilia include the bonnet, or is it just bumpers and RHD dash? The picture at the top of this thread shows a different bonnet too - which I'll need to do my planned Vauxhall Monaro conversion.

[ScaleCentral]

There are two kits out. One is the 2003 with the flat hood. The other is a GTP Sport from 2004 with the hood as you need with the openings. I'm not sure which one is in the AMT kit, but you can clearly see which one you get with the Polar Lights. The ones with prepainted GTP graphics are the ones you need.
Nic

Originally Posted by Mogster

Does the transkit from Scaleautomobilia include the bonnet, or is it just bumpers and RHD dash? The picture at the top of this thread shows a different bonnet too - which I'll need to do my planned Vauxhall Monaro conversion.

[robertwhall]

Originally Posted by ScaleCentral

There are two kits out. One is the 2003 with the flat hood. The other is a GTP Sport from 2004 with the hood as you need with the openings. I'm not sure which one is in the AMT kit, but you can clearly see which one you get with the Polar Lights. The ones with prepainted GTP graphics are the ones you need.
Nic

The '04 kits have the flat hood (AMT kit and PL kits) and the '05 kits (PL 'Drift Car' versions) have the scooped GTO hood, as well as revised fascias.